Installing Battery - Epson TM-P60II Technical Reference Manual

Installing Battery

The printer does not operate without a charged battery installed.
Follow the steps below to install the battery.
Be sure to use the battery OT-BY60II.
Using a battery other than the one specified may cause fire, explosion, leakage,
overheating or other damage.
WARNING
• When removing or installing the battery, be sure to turn off the power before doing so.
• Dispose of used batteries according to the instructions.
1
Make sure that the printer is turned off.
2
Open the battery cover.
3
Install the battery, and close the battery cover.
To charge the battery, see
38
"Charging Battery" on page 73.