Replacing The Fuse; Technical Specifications - Omnitronic KB-208A User Manual

8.1 Replacing the fuse

If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1: Open the fuseholder on the rear panel with a fitting screwdriver.
Step 2: Remove the old fuse from the fuseholder.
Step 3: Install the new fuse in the fuseholder.
Step 4: Replace the fuseholder in the housing.
If the speaker system distorts, one of the loudspeakers may be defective. Test the speaker system once
more with another amplifier. If the sound remains distorted, the speaker system should not be operated any
more in order to prevent further damage. Please contact your dealer.
If clacking sounds are heard from the speaker system, screws may have loosened due to the continuous
vibrations. The speaker system should be checked by a specialist. Especially for public use, the speaker
system should be checked before every operation so that the speaker system and the speakers in the
systems are always well fixed.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by a special power supply
cable available at your dealer.
Should you have further questions, please contact your dealer.

9. TECHNICAL SPECIFICATIONS

Power supply:
Rated power:
Program power:
Components:
Inputs:
Mic
Line
Feed-through output:
Max. SPL:
Frequency ange:
Dimensions
(HxW D):
Weight:
Please note: Every information is subject to change without prior notice. 09.06.2011 ©
KB-208A
80 W RMS
160 W
8" woofer, 1" horn
bal. 3-pin XLR
bal. 3-pin XLR
-
102 dB
65 Hz - 18 kHz
400 x 277 x 257 mm 510 x 350 x 285 mm 580 x 480 x 325 mm 740 x 555 x 400 mm
8 kg
KB-210A
115/230 V AC, 50/60 Hz ~
120 W RMS
240 W
10" woofer, 1.35" 12" woofer, 1.35"
horn
bal. 6.3 mm jack, bal. 6.3 mm jack,
3-pin XLR
stereo RCA,
bal. 3-pin XLR
bal. 6.3 mm jack, bal. 6.3 mm jack,
3-pin XLR
110 dB
55 Hz - 18 kHz 50 Hz - 18 kHz
14 kg
31/31
KB-212A
150 W RMS 180 W RMS
300 W
15" woofer, 1.75"
horn
bal. 6.3 mm jack,
3-pin XLR
stereo RCA, stereo RCA,
bal. 3-pin XLR bal. 3-pin XLR
bal. 6.3 mm jack,
3-pin XLR
115 dB
40 Hz - 18 kHz
18 kg
00061296.DOC, Version 1.1
KB-215A
360 W
horn
3-pin XLR
3-pin XLR
120 dB
27 kg