Spare Liquid Propane Tank Barrier Bar Assembly; Door And Firebox Assembly - Nexgrill 720-0649 Manual

Figure 338
CSA International
Project 2075516
11 of 38

5. Spare Liquid Propane Tank Barrier Bar Assembly

Attach the barrier bar (I) to the bottom panel (B) and
back panel (H) using two 5/32-in. x 10-mm truss head
screws (AA) and two 5/32-in. locking washers (BB) as
shown in Fig. 6.

6. Door and Firebox Assembly

Attach the two doors (C) by fitting the hinge on
the bottom panel inside the holes of the doors as
shown in Fig. 7.
CAUTION Please have one person to hold the
two doors before assembling the firebox onto grill
cart. Failure to do so may result in injury.
CAUTION The firebox assembly is heavy and
will require two or more people to lift and position
onto grill cart. Failure to do so may result in injury.
Remove the firebox assembly (A) from the carton
and carefully place onto the grill cart, at the
same time keep the top door hinge in place as
shown in Fig. 7
Note: Take care when moving the firebox
assembly
as the bottom flanges can be bent, which would
misalign the holes.
I
C
10
Fig. 6
2 X
H
B
Fig. 7
A
Cart grill
Hole of the
door
Door hinge