Table of Contents
Advertisement
Figure 338
CSA International
Project 2075516
27 of 38
2．Turn all knobs to OFF. Turn off LP gas supply and remove the LP cylinder from the grill cart. Remove
the brass adapter of the LP regulator from the manifold with a wrench.
3．Install the NG regulator hose to the manifold and secure using a wrench.
4．Screw the regulator on the right side panel from inside to outside
Main Tube Burner Conversion
Tools required:
Phillips Head Screwdriver (+)
6mm nut driver
26
Hide quick links:
Advertisement
Table of Contents
