System Requirements - StarTech.com 1UCABCONS Instruction Manual

System requirements

The following are required to install the console:
• 1U Cabinet Console - assembled "LCD panel + keyboard + mouse
pad" drawer
• Rear bracket & extension kit - This kit contains two pieces of rear
brackets and two extensions. Make sure you have the correct kit to fit
the depth of your cabinet.
Note: the following length is measured between front and rear poles,
inside the rack cabinet not the outside depth of a rack
Front pole to rear
pole distance
( Depth )
Minimum
Maximum
Front pole to rear
pole distance
( Depth )
Minimum
Maximum
Please see diagram on the following page
Instruction Manual
1UCABCONS
cm inch
59 23.2
96 37.8
CABCONS30KIT
cm inch
57.5 22 5/8
70.5 27 3/4
1UCABCONS17
cm inch
59 23.2
96 37.8
CABCONS42KIT
cm
77.5
90.5
2
1UCABCONS19
cm inch
59 23.2
123 48.4
inch
30 1/2
35 5/8