Assembly - Kenmore 415.16649010 Use & Care Manual

ASSEMBLY

1
Attach the two locking casters at the rear of the bottom shelf
and the two fixed casters at the front using the supplied wrench.
Caster wrench
Qty.1
Bottom shelf
2
Attach side panels to bottom shelf using three
1/4-20x1/2" screws, 7mm lock washers and
7mm flat washers per panel.
IMPORTANT: Panel with large hole must
be on right side of bottom shelf.
Left side panel
Make sure side panels
are pushed as far to the
rear of bottom shelf as
possible before fully
tightening screws.
Fixed caster
1/4-20x1/2" screw
Qty.6
1/4-20x1/2" screw
7mm lock washer
7mm flat washer
Locking caster
7mm lock washer
7mm flat washer
Qty.6
Qty.6
Right side panel
(with large hole)
464224010 • 15