Kenmore 415.16649010 Use & Care Manual page 22

14
Attach two 1/4-20x5/8" screws, 7mm lock washers and 7mm flat washers on right side of fire box, shown A. Only tighten
one-fourth of screw length, so that mounting panel of shelf can slide between fire box and washers in next step. Do not
fully tighten the screws.
Next, insert the keyhole slots on mounting panel of burner shelf over the two screws and washers. Make sure the tabs on
shelf mounting panel insert into cut-outs on fire box, shown B. Fully tighten the two screws.
1/4-20x5/8"
Qty.2
A
B
22 • 464224010
Screw
7mm lock
Qty.2
Tabs into cut-outs
washer
Qty.2
7mm lock
washer
1/4-20x5/8"
screw
panel
Keyhole slot over the
screw and washer
7mm Flat washer
7mm flat
washer