Kenmore 415.16649010 Use & Care Manual page 24

Remove the three #8-32x3/8" screws and 4mm lock washers (pre-assembled to the valve bracket) from the
16
sideburner valve bracket. Position sideburner valve bracket beneath sideburner shelf fascia so that valve stem
comes through larger center hole in fascia. Align the lower hole on valve bracket with the lower hole on fascia.
Secure using one #8-32x3/8" screw and 4mm lock washer, removed previously. Place sideburner bezel over valve
stem on front side of fascia. Align small holes on bezel and holes on fascia with holes on valve bracket, making
sure "OFF" is on the top of bezel. Secure using the remaining two #8-32x3/8" screws and 4mm lock washers,
shown A.
Press sideburner control knob onto valve stem, shown B.
A
B
24 • 464224010
#8-32x3/8" screw
Qty.3
#8-32x3/8"
screw
4mm lock
washer
#8-32x3/8"
screw
Control knob
4mm lock washer
Qty.3
Valve stem
4mm lock
Valve bracket
washer
Valve stem