Table of Contents
Advertisement
PROPANE TANK ASSEMBLY
1.
Attach propane gas tank to regulator inlet fitting by turning the regulator clockwise as shown below.
Hand frighten.
2.
LP gas cylinder must be fitted with a listed overfill prevention device (OPD)
CAUTION!
DO NOT USE TOOLS TO ATTACH REGULATOR / HOSE ASSEMBLY TO PROPANE
TANK
1.
Lift the tank retention ring located inside the cart and attach to bracket under the heat shield.
2.
Put the gas tank into the gas tank hole. Release the tank retention ring so that the ring rests around the
top of the gas tank.
Assembly Instruction
continued
18
Advertisement
Table of Contents
