To Disable Password
1.
Choose the Set Password option from the CMOS Setup Utility main menu and
press <Enter>.
2.
When you see "Enter Password", enter the existing password and press
<Enter>.
3.
You will see "Confirm Password". Type it again, and press <Enter>.
4.
Select Set Password again, and at the "Enter Password" prompt, please don't
enter anything; just press <Enter>.
5.
At the "Confirm Password" prompt, again, don't type in anything; just press
<Enter>.
6.
Select Save to CMOS and EXIT, type <Y>, then <Enter>.
AIMB-252 User Manual
48