Advantech AIMB-252 User Manual page 51

Video Off Method [DPMS]
This item allows user to determine the manner is which the monitor is blanked.
V/H SYNC+Blank This option will cause system to turn off vertical and horizontal syn-
chronization ports and write blanks to the video buffer.
Blank Screen This option only writes blanks to the video buffer.
DPMS Initial display power management signaling.
Video Off In Suspend [Yes]
This item allows user to turn off Video during system enter suspend mode.
Suspend Type [Stop Grant]
This item allows user to determine the suspend type.
Modem use IRQ [3]
This item allows user to determine the IRQ which the MODEM can use.
Suspend Mode [Disabled]
This item allows user to determine the time of system inactivity, all devices
except the CPU will be shut off.
HDD Power Down Mode [Disabled]
This item allows user to determine the time of system inactivity, the hard disk
drive will be powered down.
Soft-Off by PWR-BTTN [Instant-Off]
This item allows user to define function of power button.
Instant-Off Press power button then Power off instantly.
Delay 4 Sec Press power button 4 sec. to Power off.
Wake up by PCI card
This item allows user to Wake up the system by PCI card. The choices are
"Enabled" and "Disabled".
Wake up by LAN [Enabled]
This item allows user to Wake up the system by LAN. The choices are "Enabled"
and "Disabled".
Wake up by ring [Enabled]
This item allows you to wake up the system via COM port from the remote host.
The choices: "Enabled", "Disabled".
USB KB Wake_Up From S3 [Disabled]
This item allows user to set USB keyboard wake up system from S3 Enable or
Disable.
Resume by Alarm [Disabled]
The choices are "Enabled" and "Disabled". Fields that follow below indicate date
of current month and time of alarm settings, if enabled.
Primary IDE 0 (1) and Secondary IDE 0 (1) [Disabled]
When Enabled, the system will resume from suspend mode if Primary IDE 0 (1)
or Secondary IDE 0 (1) becomes active. The choices are "Enabled" and "Dis-
abled".
FDD, COM, LPT PORT [Disabled]
When Enabled, the system will resume from suspend mode if the FDD, inter-
face, COM port, or LPT port is active. The choices are "Enabled" and "Disabled".
PCI PIRQ [A-D]# [Disabled]
When Enabled, the system resumes from suspend mode if an interrupt occurs.
The choices are "Enabled" and "Disabled".
43 AIMB-252 User Manual