Configuration And Specifications - Elite Robo Slide Instruction Manual

C O N F I G U R A T I O N
Elite's Recommended Gate Setup Configuration
Guide Rollers
18 VAC Plug-In Transformer,
for Each Gate Operator
Robo Slide Specifications:
Gate Speed – 11 inch per second
Maximum Gate Length – 20 feet
Maximum Gate Weight – 800 pounds
Maximum Cycles – 70 cycles per day with Elite's Plug-In Transformer.
– Solar power cycles per day varies, Contact Elite for more Information
– Battery back-up cycles (50 cycles total)
AC Power Supply – 18 VAC 2.0 Amp Plug-In Transformer (Elite Part #
AC Power Supply Wire – 14 gauge or greater landscape lighting cable rated for direct burial and
DC Power Supply – Built-in, back-up for AC or Solar power failure only
Solar Power – Optional (Elite Part #
Be sure to read and follow all Elite's instructions before installing and operating any
Elite product. Always disconnect the gate operator's power source before repairs are
attempted. Elite Access Systems, Inc. is not responsible for improper installation or
CAUTION failure to comply with local building codes.
A N D
Warning Signs on Both Sides of Gate
2"x 2" Mesh Wire
Across Entire Gate
Warning Sign Clearly Visible on Gate Operator
Reinforced Concrete to Bolt Operator on
U.L. Listed Underground Conduit for Wires
300 watts at maximum length of 1000 ft
SOLAR 3)
S P E C I F I C A T I O N S
3" Maximum Picket Width
Steel V-Groove, High Speed Ball Bearing Wheels
A POW-1)
Guide Rollers
Over-Travel Stops
on Both Ends of
Gate Rail