Features And Specifications - Elite ACTUATOR-1 Installation Instructions & Manual Book For Architects, General Contractors & Dealers

FEATURES AND SPECIFICATIONS

MOTOR - 120V, 60Hz, 3 amp - automatic reset system.
WORM GEAR REDUCTION - 27:1, Steel and alloy bronze gears.
CYCLES - Complete 90° cycle - 30 per hour with ambient temp. of 90°.
CAPABILITIES - Maximum gate size 14' wide, 500 lbs.
TRAVEL SPEED - 18 to 21 seconds 90° opening.
DIMENSIONS - L (open) 44 1 / 2", L (closed) 29 1 ⁄ 4", H 7 1 ⁄ 2", W 4 1 ⁄ 2".
SENSOR - Causes the gate to stop when it makes contact with an object
while opening or closing.
TORQUE - 450 lbs. of torque.
MODULAR BOARD - Uses LEDs to indicate all input and output functions
of the gate operator including motor error.
OUTPUT SHAFT - 1 1 ⁄ 4" stainless steel.
FINISHING - Aluminum die-cast body with epoxy paint and stainless steel
shaft for excellent corrosion resistance.
EMERGENCY RELEASE - Convenient key release to operate the gate
manually in case of power failure.