Tempo Controller; Knob Preset Quick-Edit - E-Mu Proteus 1000 Operation Manual

Tempo Controller

Knob Preset
Quick-Edit
   
Quick Edit does not work
while in the Edit menu with
"Knobs Deep Edit" enabled.
Following are a few of the standardized MIDI Switch numbers.
64 - Sustain Switch (on/off)
65 - Portamento (on/off)
66 - Sostenuto (on/off)
This function allows a MIDI controller to change the Base Tempo of the
Master Clock. The Master Clock is used for the clock divisor PatchCords,
tempo-based envelopes and synced LFOs. (See "Clock Modulation" on
page 62.) You can assign any controller number from 0-31, mono key
pressure, or the pitch wheel to change the Global Tempo.
A different controller can be used to change the tempo up or down. The
Pitch Wheel can be assigned to both the up and down parameters to vary
the tempo up and down from a single controller. If any other controller is
assigned to both the up and down parameters, Proteus 1000 redefines the
center of the controller's range as zero (so it acts like a pitch wheel).
MIDI Controller values are added to the Base Tempo with a range of ±64.
When the controller is set to "off" the tempo returns to its original setting.
This control has no effect when using an external clock.
TEMPO CONTROLLER#
Up: 03
"Quick-Edit" changes the initial controller setting in the preset whenever
you move a Control Knob. This parameter selects whether or not the front
panel Controller Knobs are used to Quick-Edit the currently selected preset.
See "Real-time Control" on page 23 in the Operations chapter for more
details.
KNOBS PRESET QUICK-EDIT
disabled
67 - Soft Pedal (on/off)
69 - Hold Pedal 2 (on/off)
Down: 09
Proteus 1000 Operation Manual 47
Master Menu
MIDI Parameters
CHAN
16