Connection Instructions; Basic Setup - E-Mu Proteus 1000 Operation Manual

Connection
Instructions

Basic Setup

   
If Proteus 1000 does not
seem to be responding correctly,
make sure that both Proteus
1000 and your MIDI controller
are set to the same MIDI
channel.
   
The Right Main output
jack carries a mono mix of the
left and right channels when the
Left Main plug is not plugged in.
The Left Main output jack is a
stereo jack carrying both
channels when the right output
jack is empty.
14 E-MU Systems
Control
Footswitch
Pedal
~
Male RCA plug
to
Male Phono Plug
Aux. or
Tape In
Home Stereo
System
MIDI In
The module is controlled by MIDI messages received at the MIDI In jack.
Normally you will connect MIDI Out of a controller such as a MIDI
keyboard to the MIDI In of Proteus 1000. Be sure to connect a Footswitch
and/or Control Pedal to your MIDI keyboard. Many of the factory presets
use MIDI controllers.
Outputs
In order to reproduce the widest dynamic range and frequency response,
use a high quality amplification and speaker system such as a keyboard
amplifier or home stereo system. A stereo setup is highly desirable because
of the added realism of stereophonic sound. Headphones can be used if an
amplifier and speaker system is not available. Plug stereo headphones into
the headphone jack located on the left side of the front panel.
R E A L T I M E C O N T R O L L E R S A S S I G N A B L E K E Y S
P R E S E T
L E V E L
E X I T E N T E R
S A M P L E
P A G E
S E Q U E N C E R
P R E S E T S E L E C T
R E T U R N
1 2 3 4 5 6 7 8 9 0 .
EMULATOR
MIDI Out
A
To
Main Outs

Connection Instructions

The Headphone
Output is located
on the Front Panel
S C O T T S V
B
IN THRU
S C O T T S V
Mixer
Amp
Speakers
Home Studio
System
Setup
A L L E Y C A . U . S . A .