Save/Copy Menu; Saving A Preset - E-Mu Proteus 1000 Operation Manual

Saving a
Preset
   
Each time you change a
preset parameter, the Save/Copy
button LED illuminates
reminding you to save your
work.

Save/Copy Menu

The Save/Copy menu is used to save changes to a preset and to copy data
between presets. When in "Quick Edit" mode, this menu always defaults to
the "Save to Preset" page of this menu with the cursor on the second line.
You can use the Data Entry Control to navigate to other pages that support
copying information.
Any time you make a change to a preset, either using the Edit menu or by
changing the Controller Knobs in Quick Edit mode, you must save the
preset in order for the change to become permanent. When you save a
preset it erases any existing preset information in that location. Make sure
that the destination location does not contain preset information you want
to keep.
SAVE PRESET to
1
020 Destination Preset
To Save a Preset
Press the Save/Copy menu button.
1.
Scroll to the Save Preset screen using the data entry control.
2.
Move the cursor to the bottom line on the display.
3.
Select the new preset location using the Data Entry Control.
4.
Press the Enter/Home button.
5.
User
Proteus 1000 Operation Manual 155