Home/Enter Button; Data Entry Control; Front Panel Controller Modes; Real-Time Control - E-Mu Proteus 1000 Operation Manual

Save/Copy Button

Home/Enter Button

Data Entry Control

Front Panel
Controller
Modes

Real-time Control

The Save/Copy button is used to save or copy presets and to copy data.
Selected groups of parameters, such as PatchCord settings, can be copied
between Presets and/or between Layers using this menu.
The LED to the right of the button illuminates to indicate that you are in
the Save/Copy menu. The LED also illuminates when any preset parameter
has been changed in the Edit menu (or if the front panel knobs have been
moved with Quick-Edit mode enabled).
The Home/Enter button is dual purpose. In general, this button acts as the
"Home" button. For example, when in an Edit menu, this button snaps the
cursor to the page name field of the current screen. When viewing the
Preset Select screen (we also call it the main screen), this button snaps the
cursor to the preset number field. In these instances, the LED is not used.
Some screens and parameter fields use this button as the "Enter" button. In
these cases, the LED blinks to indicate that the module is waiting for your
response to initiate the operation.
The Data Entry Control is a stepped, variable control switch used to change
parameter values. The wheel increments or decrements the current value
one unit with each click. This control incorporates acceleration, which
advances the value faster if the Data Entry Control is turned quickly.
The Real-time Controller Knobs serve three purposes:
Real-time control of synthesizer parameters
1.
"Quick Editing" the initial settings of the real-time controllers
2.
"Deep Editing" the parameters
3.
This section describes each of the three uses.
The Real-time controller knobs provide direct control of the Proteus 1000's
synthesizer parameters. They are always active when on the Preset Select
(main) screen. They can optionally be used to transmit MIDI controller
messages to other MIDI devices.
The Control button (left of the knobs) changes the function of the real-time
controller knobs. Each time the button is pressed, the Control Mode toggles
to select one of the three Control Row groups. The currently selected
Control Row is indicated by the illuminated LED to the right of the button.
The control knob functions are determined by the selected Control Row.
The three Control Rows generate MIDI data that can control the preset on
the current MIDI channel (the channel showing on the Preset and main
screen. The labels (Filter Cutoff, Filter Res, Shape, Image, etc.) printed on
Basic Operations

Front Panel Controller Modes

Proteus 1000 Operation Manual 23