Appendix; Front Panel Knob Functions - E-Mu Proteus 1000 Operation Manual

Front Panel
Knob
Functions
   
The Front Panel Knobs
can be reprogrammed for each
preset and stored in any of the
User Presets. The functions
shown here are the factory
programmed settings.

Appendix

This section provides some of the more technical information about
Proteus 1000. In this appendix, you will find information about velocity
curves, MIDI commands and PatchCord charts.
The front panel knob functions are standardized for most of the factory
presets. The typical functions of the controller knobs are described below.
Match the controller knobs on your MIDI controller to the Realtime
Controller Assignments in the Master menu to control these functions.
TONE
ATTACK
DYNAMIC 1
A/E/I
Tone .................................... Filter Frequency
Presence .............................. Filter Resonance
Shape ................................... Filter Envelope Amount
Image................................... Typically brings in additional layers
Attack .................................. Volume or Filter Envelope Attack
Decay/Release ..................... Vol/Filt. Envelope Release and/or Decay
Movement ........................... LFO->Dynamic Movement (i.e.panning)
Rate ..................................... LFO Rate
Dynamic 1 ........................... Typically Velocity -> Amplifier Volume
Dynamic 2 ........................... Typically Velocity -> Filter Frequency
FX A ..................................... Effects Processor A Amount
FX B ..................................... Effects Processor B Amount
PRESENCE
DECAY/RLS MOVEMENT
DYNAMIC 2 FX A
B/F/J C/G/K
Proteus 1000 Operation Manual 163
SHAPE IMAGE
RATE
FX B
D/H/L