Assign Group - E-Mu Proteus 1000 Operation Manual

Assign Group

Synth (low):
Same as Synth (last) but with low note priority. When you
release the currently sounding solo key while holding other keys down, the
lowest held solo key sounds in a Legato fashion (MiniMoog).
Synth (high):
Same as Synth (last) but with high note priority. When you
release the currently sounding solo key while holding other keys down, the
highest held solo key sounds in a Legato fashion.
Fingered Glide:
Same as Synth (last), except that Glide is disabled when
playing Staccato, enabled when playing Legato.
Use the Assign Group parameter to assign a certain number of channels to
each layer. By assigning all voices in the preset to assign groups, important
parts are protected from being "stolen" by more recently played keys. Or
you can assign a voice, such as an open high hat, to a mono channel so it is
cancelled by a closed high hat on the same mono channel. Layers rotate
within their assigned "bin" of channels, not interfering with other bins.
L1
ASSIGN GROUP
poly all
The modes are:
Poly All:
Notes are played polyphonically with dynamic channel
assignment using all 64 channels.
Poly 16 A-B:
Two bins of 16 channels each. Notes are played polyphoni-
cally with dynamic channel assignment using no more than 16 channels.
Poly 8 A-D:
Four bins of 8 channels each. Notes are played polyphonically
with dynamic channel assignment using no more than 8 channels each.
Poly 4 A-D:
Four bins of 4 channels each. Notes are played polyphonically
with dynamic channel assignment using no more than 4 channels each.
Poly 2 A-D:
Four bins of 2 channels each. Notes are played polyphonically
with dynamic channel assignment using no more than 2 channels each.
Mono A-I:
Nine monophonic channels, Any layers assigned to the same
letter interrupt each other without affecting other layers.
Assign Group
Proteus 1000 Operation Manual 103
Edit Menu