Preset Patchcords - E-Mu Proteus 1000 Operation Manual

Preset Patchcords

O O O O
To crossfade between
effects.
1) Set FXA Send 1 to 100%.
2) Set FXB Send 1 to 0%.
3) Set FX Cord #1 to FXA Send 1
at -100.
4) Set FX Cord #2 to FXB Send 1
at +100.
Increasing the controller amount
will crossfade from FXA to FXB.
Preset PatchCords give you real-time control of global parameters. The
effect processors are a powerful synthesis tool and this feature lets you
control and use them in exciting new ways. For example, you can dynami-
cally adjust the effects mix during a sequence or live performance.
There are many exciting performance possibilities using Preset PatchCords
to control BEATs and Arpeggiator parameters. The front panel knobs "Wild
1-4" are usually connected to Arp and BEATs parameters in factory presets
marked "arp:" or "bts:". Likewise, Pitch and Mod wheels are often routed to
"Beats Busy" and "Beats Variation" in factory presets marked "bts:". Be sure
to try out these controls
There are 12 Preset PatchCords per preset with a source, a destination and
an amount control. The amount can be set from -100 to +100. The Preset
PatchCord controls are added to the FX Send Amounts set in the Master or
Edit menus. In other words, multiple sources connected to destinations are
summed.
PRESET CORDS
Pedal
Modulation Sources:
Off
PitchWhl (Pitch Wheel)
ModWhl (Modulation Wheel)
Pedal
MIDI Volume (Controller 7)
MIDI Pan (Controller 10)
MIDI Expression (Controller 11)
MIDI A-L
Footswitch 1
Flip-Flop Footswitch 1
Footswitch 2
Flip-Flop Footswitch 2
Footswitch 3
Flip-Flop Footswitch 3
DC
-> FXBSend2
Modulation Destinations
Off
Effect A Send 1
Effect A Send 2
Effect A Send 3
Effect A Send 4
Effect B Send 1
Effect B Send 2
Effect B Send 3
Effect B Send 4
Preset Lag In
Preset Lag Amount
Preset Lag Rate
Preset Ramp Rate
Arp Resolution
Arp Extension
Arp Velocity
Arp Gate
Arp Interval
Beats Velocity Group 1-4
Beats Transpose (Xpose) Group 1-4
Beats Variation
Beats Busy
Proteus 1000 Operation Manual 123
Edit Menu
Preset Patchcords
#01
+100