Preset Tempo Offset; Audition Riff Selection; Play Solo Layers - E-Mu Proteus 1000 Operation Manual

Preset Tempo Offset

   
See "Base Tempo" on
page 54.
Audition Riff
Selection
O O O O
Listening to the Riffs is a
quick way to learn the sounds in
Proteus 1000. If a preset has
hidden tricks or controllers, these
will be shown off in the Riff.

Play Solo Layers

128 E-MU Systems
This function allows you to double or halve the Base Tempo as it applies to
this preset. When playing or sequencing several presets in Multimode, the
Base Tempo may be too fast or slow for one preset. Using this feature, you
can adjust the tempo for the misbehaving preset. The Tempo Offset can use
the current tempo or be set to half or twice the current tempo.
TEMPO OFFSET
use current tempo x 2
A Riff is a short pre-recorded musical phrase which can be anything from a
single note to a full 16-track sequence as in the BEATS (bts) Riffs. This
function allows you to assign a Riff to a Preset. The Preset Riff will be used
when the front panel Audition button is pressed or when BEATS mode is set
either to "On" or "Omni" in the main preset selection screen.
The Riffs themselves cannot be modified.
AUDITION SELECTION
Plays:KEY-MiddleC
When constructing multilayer sounds it is often useful to turn off one or
more of the layers so you can hear what you're doing! This feature allows
you to temporarily solo individual layers or listen to them in any combi-
nation. This screen differs from the other Edit screens in that it is NOT
saved with the preset. The values reset each time you exit the Edit menu.
Solo is activated by setting any layer to On (On = the layer is being Soloed).
Any layers set to On will play and any layers set to Off will be muted. If all
layers are set to Off, then Solo mode ends and all layers play normally.
When you exit the Edit menu, all layers play normally.
PLAY SOLO LAYERS
1: off 2: off 3: off
Edit Menu
Preset Tempo Offset
4: off