Midi Footswitch Assign - E-Mu Proteus 1000 Operation Manual

O O O O
Proteus 1000 factory
presets have certain synth
parameters assigned to each
controller letter and so these are
"Global" controller assignments.
For example, assigning a MIDI
controller to "A" in this screen
would let you control filter Fc for
all the factory presets. See
"Front Panel Knob Functions" on
page 163.
MIDI Footswitch
Assign
46 E-MU Systems
The Real-time Controller assignment also specifies which controller
numbers are transmitted when the "Knobs MIDI Out" is enabled (see
"Knobs/Riff MIDI Out" on page 48).
REALTIME CONTROLLER #
A: 21
REALTIME CONTROLLER #
E: 25
REALTIME CONTROLLER #
I: 80
Note: Controllers 7 and 10 are already assigned to Volume and Pan for each
MIDI channel. Controllers 91 & 93 are the standard controller numbers for
reverb and chorus send amounts.
Following are a few of the standardized MIDI Controller numbers as
defined by the MIDI manufacturers association. The controllers shown in
Bold are automatically routed to the destination (volume & pan) or have
their own PatchCord source. Others, such as Portamento Time, can be
routed using a PatchCord to have the desired effect.
1 - Modulation Wheel
2 - Breath Controller
3 - Old DX7 Aftertouch
4 - Foot Pedal
5 - Portamento Time
6 - Data Entry
Like the MIDI Controllers, you can assign three MIDI footswitches to MIDI
footswitch numbers. Footswitches numbers are from 64-79. Destinations
for the footswitch controllers are programmed in the PatchCord section of
the Edit menu.
FOOTSWITCH CONTROLLER #
1: 64
B: 22 C: 23
F: 26 G: 27
J: 81 K: 91 L: 93
7 - Volume
8 - Balance
9 - Undefined
10 - Pan
11 - Expression
2: 65 3: 66
Master Menu
MIDI Parameters
D: 24
H: 28