Restoring Multisetups; Saving & Naming Multisetups - E-Mu Proteus 1000 Operation Manual

Restoring
Multisetups
Saving & Naming
Multisetups
32 E-mu Systems
To Modify a Parameter
Press either Cursor button repeatedly (or hold down the left or right cursor
button while turning the Data Entry Control) until the cursor is below the
desired parameter value. Rotate the Data Entry Control to change the value.
To Return to the Main Screen
Press the Multi button, turning off the LED.
Proteus 1000 contains 128 Multisetup locations. These are all User locations
which you can use to store your own Multisetups.
Multisetups can also be restored using a MIDI Bank Select command.
Select: cc00 = 80, cc32 = 00, (dec) then send a Program Change command
corresponding to the Multisetup you wish to select.
RESTORE MULTISETUP
003 Song for Alex
To Restore (Select) a Multisetup:
Press the Multi menu button lighting the LED. The Multi menu screen
1.
displays the menu page most recently selected since powering up
Proteus 1000. The cursor appears below the first character of the screen
heading on line one.
Go to the "Restore Multisetup" screen (shown above) using the Data
2.
Entry Control. This is the first screen in the menu.
Press either cursor button to move the cursor to the bottom line of the
3.
screen.
Now, use the Data Entry Control to select a Multisetup. The Enter LED
4.
will be flashing.
Press the Enter button to load the selected Multisetup.
5.
To Save a Multisetup:
Set the Preset, Volume, Pan settings the way you want them for all 32
1.
channels. Set the Master menu parameters the way you want them.
Press the Multi menu button lighting the LED.
2.
Multisetup Menu
Multisetups