Insert With Direct Connection (Z.c. Fireplace) - Travis Industries Revere Fireplace Insert Owner's Manual

Insert with Direct
Connection (Z.C.
Fireplace)
NOTE:
Direct connections require
installation of an airtight
block-off plate or damper
adapter (see "Block-off
Plate Installation" on page
11).
NOT ALLOWED IN
CANADA
© Travis Industries
Stove Installation
NOTE: This installation may be
used with a masonry or zero
clearance fireplace. This
illustration depicts a zero
clearance insert, all requirements
in the section "Zero Clearance
Fireplace Requirements" must be
fulfilled prior to installation.
Combustible Mantle
Surround Panels
See the section
"Insert Placement
Requirements" for
minimum clearances
and hearth required.
Telescoping Legs
(for qualified installers only)
Optional
100-01165
Stainless steel
chimney connector
must Extend 1' past
the block-off plate.
Damper must
be removed
Block-off plate or
damper adapter
Z.C. (Metal) firebox
No modification to the firebox
of the z.c. fireplace is allowed.
13
Figure 10
4110919