Page 1
TUNGSTEN User Manual Thank you for purchasing a BATRIBIKE Electric Bicycle from Fallowgate Limited. With care and correct usage your bicycle will give many years of service. Please read the manual fully before use.
6 weeks of purchase, free of charge. If it is more con- venient for you a local cycle shop could carry out this operation at your expense. Your BATRIBIKE bicycle uses standard cycle parts wherever possible. Items such as tyres, tubes, lights, brake pads/blocks and cables may be obtained direct from us or your local cycle shop or retailer.
If your BATRIBIKE Tungsten is not in use for an extended period, charge the battery once a month to prevent deterioration.
Page 4
Quick release fittings for seat height adjustment. With the locking lever in the loose position, tighten the nut until finger tight, The final tightening is done by moving the lever to the locked position. To undo move lever to loose position to enable height adjustment. Loose Locked Front Light...
Page 5
Riding To turn on the power, insert the key into the lock on the battery and turn to the on position. Then switch on the controller on the handle- bars by pressing the power button. The dis- play will switch all segments on and display the current settings for the wheel size.
Pedal Assistance The amount of assistance from the motor can be selected using the UP and DOWN buttons. There are 7 levels of power from Pedal Only through six levels of Pedal Assistance. The amount of assistance selected is displayed by the Assist Meter.
Power Level Display The amount of power actually being sent to the motor is dis- played on the power meter. This is sensed by the pressure put on the pedals and is shown in 6 levels. Battery Level Display A battery meter shows the amount of power remaining in the battery.
Trip Meter To display the Trip Meter press the SET button twice and the KM icon will display together with the current trip value. To reset the trip to zero simply press the DOWN button when the trip distance is displayed. To leave the trip distance simply wait 5 seconds and the display will return to its normal mode.
Page 9
Use the UP and DOWN buttons to change the values. 10 Secs Your BATRIBIKE Tungsten has been preset to 27 and 2174 which will give a reasonably accurate reading in Kilometres. To reset the speedometer and distance displays to measure miles per hour and miles you can “cheat”...
2 minutes. When the battery and controller are turned on the unit should function correctly. If the code display persists then please con- tact your dealer or BATRIBIKE for assistance quoting the code shown on the display. Unused Icons °C...
Need help?
Do you have a question about the TUNGSTEN and is the answer not in the manual?
Questions and answers