Selecting Third Stage Heating Differential Option - Jackson Systems T-32-TS Touchscreen Thermostat Installation Manual

INSTALLER SETUP MENU

SELECTING THIRD STAGE HEATING DIFFERENTIAL OPTION

Menu 17:S3 is used to adjust the third stage heating differential. The factory default is
°F).
2 ( 2 This represents the temperature below the second stage heating differential
when third stage heat is energized. There is a 3 minute time delay before third stage
UP DOWN
heat is energized. Touch the or arrows to change the differential.
Next
Back
Adjustable from 1 - 10°F in 1° increments
38