Using Multiple Sensors For Temperature Averaging - Jackson Systems T-32-TS Touchscreen Thermostat Installation Manual

REMOTE SENSOR INSTALLATION

USING MULTIPLE SENSORS FOR TEMPERATURE AVERAGING

Multiple indoor remote sensors can be wired in series/parallel for temperature
averaging. The total value of the sensors must equal 10KΩ @ 77° F. The onboard sensor
is not part of the equation even if it is configured as part of the averaging circuit.
However, when the onboard sensor is used with remote sensors, it represents 50% of
the averaging value. Figure 6 illustrates two T-32-S2 sensors used for averaging.
S2 SC S1
FIGURE 6
T-21-S2 T-21-S2
SENSOR SENSOR
49