Messages - JVC UX-J51 Instructions Manual

Messages

Displayed Message
NO DISC
NO PGM
PGM FULL
NOT SUPPORT
NonPCM
TRAY OPEN
UNLOCK
––– kHz
. . . . . . . . . . . .
64
There is no CD inserted.
RInsert a CD.
No tracks are programmed.
RProgram the tracks you want to listen to. (P.28)
RCancel program mode and use normal playback. (P.29)
An attempt was made to program a 51st CD track.
RYou can program only up to 50 tracks. (P.29)
iPod that is not supported with this device is connected. (P.34)
The [DIGITAL IN (OPTICAL)] terminal on the rear panel of the main
unit is receiving non-PCM input signals. (P.11)
The CD tray is open.
RClose the tray.
The component connected to the [DIGITAL IN (OPTICAL)] terminal
on the rear panel of the main unit is not turned on. Alternatively,
there is no signal input.
The sampling frequency of the input PCM signals is outside the
playable range.
There is no TAG information. (P.21)
Meaning