Receiving Radio Broadcasts; Listening To Fm/Am Radio - JVC UX-J51 Instructions Manual

Receiving Radio Broadcasts

This section explains how to listen to the FM/AM radio and set radio stations.
30 30

Listening to FM/AM Radio

z
Simply pressing the [TUNER/BAND] key turns on the system and allows you
to listen to the radio.
1 1
Press the [TUNER/BAND] key to select "FM" or "AM".
Each time you press the key, the band switches between "FM" and "AM".
2 2
Select a station.
Choosing from preset stations (Preset Call)
Select a preset station.
z
See P.32 and P.33 for more information on presets.
„
Selecting with the [P.CALL] keys
To display the next stored station: Press the [G] or [H]
key.
To run through the sequence of stored station at intervals of
roughly 0.5 seconds: Press and hold the [G] or [H] key.
„
Selecting with the number keys
To select P3, press the [3] key.
To select P17, press the [ 10], [1], and
[7] keys.
To select the AM tuner interval spacing
(Not applicable for U.S.A. and Canada)
1 Press the [MODE] key.
2 Select "AM 9k / 10k" using [C] or [D] and press [ENTER].
3 Press the [A] or [B] key to select the AM tuner interval spacing.
4 Press [ENTER] to set.
z
If you change the "AM 9k / 10k" setting, the previous preset
station will be cleared.