Digital Signal Processor - JVC UX-J51 Instructions Manual

Digital Signal Processor

48
1 1
Press the [TONE] key, and then select [BASS] from the
range levels (BASS: low-range tones, MID: mid-range
tones, TREBLE: high-range tones).
2 2
Press the [C] or [D] key to select the frequency (Low:
100Hz, Mid: 150Hz, or High: 200Hz) of the low-range
tones (BASS).
3 3
Press the [A] or [B] key to adjust the low tones (BASS)
level.
z
The "TONE" flashes while
setting is in progress. While
the "TONE" is flashing, you
can adjust the level in a
range from -8 to +8.