Digital Signal Processor - JVC UX-J51 Instructions Manual

4 4
Press the [TONE] key.
5 5
Press the [C] or [D] key to select the frequency (Low:
1kHz, Mid: 2kHz, or High: 3kHz) of the mid-range tones
(MID).
6 6
Press the [A] or [B] key to adjust the mid tones (MID)
level.

Digital Signal Processor

z
The "TONE" flashes while
setting is in progress.
While the "TONE" is
flashing, you can adjust
the level in a range from
-8 to +8.
Continued to next page
49