Snapshot Tutorial; Using The Control Panel - BenQ LH500 Series User Manual

Snapshot Tutorial

Using the Control Panel

The Control Panel can be used to configure camera settings.
1.
In the REC mode, press [SET].
This will select one of the Control Panel icons and display its settings.
[ ] [ ] [ ] [ ]
[SET]
2.
Use [ ] and [ ] to select the setting you want to change.
1 Snapshot image size/quality
2 Movie image quality
3 Flash
4 Self-timer
5 Soft Skin
6 HDR
• Snapshot image quality cannot be changed using the Control Panel.
3.
Use [ ] and [ ] to change the setting.
4.
If you want to configure another setting, repeat steps 2 and 3.
5.
After all the settings are the way you want, press [SET].
This will apply the settings and return to the REC mode.
If you selected "MENU", the REC menu will appear.
If you selected "SCN", the Scene Mode scene menu will appear.
• You can close the Control Panel by pressing [
Available settings
* 7 Silent Mode
8 REC menu display
9 Scene Mode scene selection (available
when the mode dial is turned to
27
Control Panel
1
2
3
4
5
6
7
8
9
] (Delete).
)