Shooting With Zoom; Optical Zoom And Digital Zoom Switch Point - BenQ LH500 Series User Manual

Shooting with Zoom

Your camera provides you with 24X optical zoom (that changes the lens focal distance),
which can be used in combination with digital zoom (that digitally processes the center
portion of the image to enlarge it). The image deterioration point depends on the image size.
1.
In the REC mode, slide the zoom controller to zoom.
Wide Angle
ide Angle) : Reduces the size of the subject and broadens the range.
(W
elephoto)
(T
2.
Press the shutter button to shoot the image.
IMPORTANT!
• Digital zoom is disabled while time stamping is turned on.

Optical Zoom and Digital Zoom Switch Point

If you hold the zoom controller towards
the optical zoom factor reaches its maximum. Momentarily releasing the zoom controller
and then holding it again towards
use to set an even higher zoom factor.
• During zoom, a zoom bar on the monitor screen shows the current zoom setting.
Telephoto
: Enlarges the subject and narrows the range.
(Telephoto) will switch to digital zoom, which you can
Focusing range
(Displayed for Auto Focus, Macro Focus, and Manual Focus.)
Zoom bar
Zoom controller
(Telephoto), the zoom operation will stop when
34