Time Stamping Snapshots; Setting The Camera's Time - BenQ LH500 Series User Manual

Hide thumbs Also See for LH500 Series:

Table of Contents

Time Stamping Snapshots (Date Stamp)

Procedure

[SET]

You can configure the camera to stamp the recording date only, or date and time in the

lower right corner of each snapshot.

• Once date and time information is stamped into a snapshot, it cannot be edited or

deleted.

Example: July 10, 2012, 1:25 p.m.

Date

Date&Time

Off

• Even if you do not stamp the date and/or time with Date Stamp, you can do so later using

the DPOF function or some printing application.

• Digital zoom is disabled while time stamping is turned on.

• Time stamping is disabled when certain Scene Mode scenes are being used.

Setting the Camera's Time (Adjust)

Procedure

[SET]

[ ] [ ]

[

] (Movie)

When the date and time settings are what you want, press [SET] to apply them.

• You can specify a date from 2001 to 2049.

• Be sure to select your Home City before setting the time and date. If you set the time and

date while the wrong city is selected for your Home City, the times and dates of all of the

World Time cities will be wrong.

Setup Tab

Date Stamp

2012/7/10

2012/7/10 1:25pm

No stamping of date and/or time

Setup Tab

Adjust

Change the setting at the cursor location

Move the cursor between settings

Toggles between 12-hour and 24-hour format

Table of Contents