Table of Contents
Advertisement
Configuring [
Procedure
[SET]
MENU
Power On
Power On/Off
Disable
• With "Power On/Off", the camera turns off when you press [
or [
] (PLAY) in the PLAY mode.
• Change this setting to anything besides "Disable" before connecting to a TV for image
viewing.
Disabling File Deletion (
Procedure
[SET]
MENU
The camera will not start the image delete operation when you press [
"
Disable" is turned on.
You can protect against accidental deletion of images by selecting "On" for
"
Disable".
• Performing a format operation will cause all images to be deleted, even if file deletion is
disabled ("On" selected for "
Selecting the Screen Aspect Ratio and Video Output System (TV Out)
Procedure
[SET]
MENU
You can use the procedure in this section to select either NTSC or PAL as the video output
system. You can also specify an aspect ratio of 4:3 or 16:9.
NTSC 4:3
Normal TV screen aspect ratio used in Japan, the U.S., and other countries
NTSC 16:9
Wide screen aspect ratio used in Japan, the U.S., and other countries
PAL 4:3
Normal TV screen aspect ration used in Europe and other areas
PAL 16:9
Wide screen aspect ration used in Europe and other areas
• Select the aspect ratio (4:3 or 16:9) that matches the type of TV you plan to use. Images
will not display correctly if you select the wrong aspect ratio.
• Images will not display correctly unless the camera's video signal output setting matches
the video signal system of the TV or other video equipment.
• Images cannot be displayed correctly on a TV or video equipment that is not NTSC or PAL.
] and [ ] Settings (REC/PLAY)
Setup Tab
Camera turns on whenever [
Camera turns on or off whenever [
pressed.
Camera does not turn on or off whenever [
(PLAY) is pressed.
Disable)
Setup Tab
Disable") for some images.
Setup Tab
REC/PLAY
] (REC) or [
Disable
TV Out
67
] (PLAY) is pressed.
] (REC) or [
] (PLAY) is
] (REC) or [
] (REC) in the REC mode
] (Delete) while
]
Advertisement
Table of Contents
