Using The Camera; Snapshot Mode; Getting Started With Capturing Images - BenQ DC E610 User Manual

3

Using the Camera

3.1

Snapshot Mode

3.1.1 Getting started with capturing images

1. Press the [
on the camera.
2. Compose your image in the LCD monitor under
Snapshot Mode.
3. Press the shutter button down halfway (1), and then
press it down fully (2).
•
Pressing the shutter button down halfway automati-
cally focuses and adjusts the exposure.
•
The focus area frame turns green when the camera is
focused and the exposure is determined.
•
When the focus or exposure is not suitable, the frame
of the focus area turns red.
•
To review the last captured image, press the [
return to Snapshot Mode.
•
The LCD monitor darkens in strong sunlight or bright light. This is not a malfunction.
•
To prevent your images from being blurred while pressing the shutter button, always
hold the camera steady. This is especially important when you are shooting under low
lighting conditions, under which your camera may reduce the shutter speed to ensure
your images are properly exposed.
•
Pressing the [
Detailed Info.
•
If QuickView is set to "On", the captured image will be displayed while the image is being
written onto the memory.
] button for more than one second to turn
] button changes the LCD display in the sequence of: OSD Normal
→
Info. Off.
Press down halfway
1
Press down fully
2
] button. Press the [
Using the Camera
] button to
→
7