Configuring Sleep State Settings; Configuring Auto Power Settings - BenQ LH500 Series User Manual

Hide thumbs Also See for LH500 Series:

Table of Contents

Configuring Sleep State Settings (LCD Save)

Procedure

[SET]

This feature turns off the monitor screen whenever no camera operation is performed for a

preset amount of time. Press any button to turn the monitor screen back on.

Trigger Time Settings: 30 sec, 1 min, 2 min, Off (LCD Save is disabled while "Off" is

selected.)

• LCD Save is disabled under any of the following conditions.

– In the PLAY mode

– While the camera is connected to a computer or other device

– During a slideshow

– During "

Tracking"

– During Voice REC playback or recording

– During movie recording and playback

• When both LCD Save and Power Saving are turned on, Power Saving takes priority.

Configuring Auto Power Settings (Power Save)

Procedure

[SET]

This feature turns off the camera whenever no camera operation is performed for a preset

amount of time.

Trigger Time Settings: 1 min, 2 min, 5 min (The trigger time is always 5 minutes in the PLAY

mode.)

• Power Saving is disabled under any of the following conditions.