Specifying The File Name Serial Number Generation Rule - BenQ LH500 Series User Manual

Hide thumbs Also See for LH500 Series:

Table of Contents

Specifying the File Name Serial Number Generation Rule

(File Numbering)

Procedure

[SET]

Use the following procedure to specify the rule that governs generation of the serial number

used in file names.

Tells the camera to remember the last used file number. A new file will be

named using the next sequential number, even if files are deleted or if a blank

memory card is loaded. If a memory card is loaded and that card already has

Continue

files stored on it and the largest sequential number in the existing file names

is greater than the largest sequential number remembered by the camera,

numbering of new files will start from the largest sequential number in the

existing file names plus 1.

Restarts the serial number from 0001 whenever all files are deleted or when

the memory card is replaced with a blank one. If a memory card is loaded

Reset

and that card already has files stored on it, numbering of new files will start

from the largest sequential number in the existing file names number plus 1.

Setup Tab

File Numbering

Table of Contents