Formatting Built-In Memory Or A Memory Card; Resetting The Camera To Factory Defaults - BenQ LH500 Series User Manual

Hide thumbs Also See for LH500 Series:

Table of Contents

Formatting Built-in Memory or a Memory Card (Format)

Procedure

[SET]

If a memory card is loaded in the camera, this operation will format the memory card. It will

format built-in memory if no memory card is loaded.

• The format operation will delete all contents on the memory card or in built-in memory. It

cannot be undone. Make sure you do not need any data currently on the card or in built-

in memory before you format it.

• Formatting built-in memory will delete the following data.

– Protected images

– Startup screen

• Formatting a memory card will delete the following data.

– Protected images

• Formatting will cause all images to be deleted, even if file deletion is disabled ("On"

selected for "

• Make sure the camera's battery is sufficiently charged before starting a formatting

operation. Formatting may not be performed correctly and the camera may stop

operating normally if the camera powers down while formatting is in progress.

• Never open the battery cover while formatting is in progress. Doing so can cause the

camera to stop operating normally.

Resetting the Camera to Factory Defaults (Reset)

Procedure

[SET]

The settings below are not reset.

World Time settings, clock settings, date format, screen language, video output

Setup Tab

Disable") for some images.

Setup Tab

Format

Reset

Table of Contents