Troubleshooting - NewAir AC-14100 Owner's Manual

TROUBLESHOOTING

Problem
The air conditioner does
not function.
The unit does not produce
adequate cooling.
The unit is noisy.
The compressor does not
work.
UNAUTHORIZED REPAIRS CAN VOID THE WARRANTY AND ENDANGER THE UNIT.
Possible Causes
The unit may be plugged in using
a different voltage.
The circuit breaker may be
tripped or there is a blown fuse.
The water tank is full.
The ambient room temperature
is lower than the set
temperature.
The unit is in direct sunlight.
Too many windows or doors are
open.
There is an additional heat
source in the room or there are
too many people in the room.
The filter is dusty or dirty.
Air inlet or air outlet is blocked.
The ambient room temperature
is lower than the set
temperature.
The unit is not leveled.
The compressor has overheated
and shut off.
NEVER TRY TO REPAIR OR DISMANTLE THE UNIT YOURSELF.
15
Solution
Check if using the wrong voltage.
Reset the circuit breaker or check for a
blown fuse.
If the full water tank indicator light is
flashing, empty the water reservoir.
Lower the set temperature.
Close any curtains or move the unit to a
more shaded area.
Close doors and windows.
Lower the set temperature.
Clean the filter per instructions above.
Make sure there are no obstructions to
proper air circulation through the unit.
Lower the set temperature.
Ensure the unit is positioned on a flat, level
surface.
Wait for temperature to drop and then turn
the unit on again.
Count on Us