Panasonic DP-2310 Operating Instructions Manual page 40

For the total system to work properly via LAN, certain information and additional parameters must be set. Please contact
your network administrator for the required information and connection to the LAN.
Important: Make a copy of this page and ask the Network Administrator to complete the required information.
Company Name
Address
Dept.
City
Tel. No.
(1) IP Address:
(2) Subnet Mask:
(3) Default Gateway IP Address:
(4) Primary DNS IP Address:
(5) Secondary DNS IP Address:
(6) Email Address:
(7) *SMTP Server Name:
(8) SMTP Auth Name:
(9) SMTP Auth Password:
(10) *POP Server Name:
(11) POP User Name:
(12) POP Password:
(13) LDAP Server Name:
(14) LDAP User Name:
(15) LDAP Password:
(16) LDAP Search Base:
(17) Host Name:
(18) Default Subject:
(19) Default Domain:
(20) Selectable Domains:
1.
2.
3.
4.
5.
(21) Remote Password:
(22) Relay XMT Password:
(23) Manager's Email Address:
(24) Insert Email Text:
(25) Relay Domains (Domains Authorized for Relay Transmission):
1.
2.
3.
4.
5.
(26) Community Name (1):
(27) Community Name (2):
(28) Device Name:
(29) Device Location:
NOTE
40
FInternet Fax Features
Setup (SMTP Mail Server/POP3 Client)
Internet Parameters (See page 46)
1. Items in Bold, depict information obtained from you Network Administrator.
2. By default the machine requires the IP Address of the DNS Server and prompts you to enter
the SMTP and POP Server Names (items 7 and 10 above).
If the DNS Server is not available, change the (DNS server address) of General Settings to
"No" (
FUNCTION
OK DNS server address
the SMTP and POP Servers.
3. If required, the MAC Address of your machine can be obtained from the 2nd page of the
General Settings List printout, by pressing
Key Operator Mode
User Information
Fax No.
or *SMTP Server IP Address:
or *POP Server IP Address:
or LDAP Server IP Address:
6.
7.
8.
9.
10.
6.
7.
8.
9.
10.
GENERAL SETTINGS
). Then the machine will prompt you to enter the IP Address of
FUNCTION
, Input ID Code,
OK Print General Settings
, Input ID Code,
Key Operator Mode
GENERAL SETTINGS
Start
.
OK