Panasonic DP-2310 Operating Instructions Manual page 39

To install your machine as POP3 Client, the following network parameters need to be programmed on your network.
• TCP/IP Address of your machine
• TCP/IP Subnet Mask of your machine
• TCP/IP Address of the Default Gateway
• TCP/IP Address of the DNS Server (if not available, see note 2)
• Email Address of your machine (see note 1)
• Name or IP Address of the Default SMTP mail server
• POP Server Name or IP Address
• POP User Account Name
• POP Password
Email Transmission (from your machine to a PC)
Email Reception (from a PC to your machine)
NOTE
3. The email address format can be the same as your regular email address. If your email
address
Internet_Fax@panasonic.com.
ifaxuser@fax01.panasonic.com
Gateway(Router)
popuser001@panasonic.com
ifaxuser@panasonic.com
Gateway(Router)
popuser001@panasonic.com
is popuser001@panasonic.com,
SMTP01.panasonic.com
(SMTP Mail Server)
SMTP POP02.panasonic.com
(POP Server)
POP3
SMTP01.panasonic.com
(SMTP Mail Server)
SMTP POP02.panasonic.com
POP3 (POP Server)
your machine's email address can be
39