Panasonic DP-6010 Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. All in One Printer
  5. Workio DP-6010
  6. Operating instructions manual
Panasonic DP-6010 Operating Instructions Manual

Panasonic DP-6010 Operating Instructions Manual

Digital imaging systems
Hide thumbs Also See for DP-6010:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Service Handbook, Service Manual
Before operating this equipment, please read the instructions completely and keep these operating instructions
for future reference.
Digital Imaging Systems

Operating Instructions

(For Copier & Network Scanner)
DP-3510/4510/6010
Model No.
J
?
I
English

Advertisement

Table of Contents
loading

Related Manuals for Panasonic DP-6010

Summary of Contents for Panasonic DP-6010

  • Page 1: Operating Instructions

    Before operating this equipment, please read the instructions completely and keep these operating instructions for future reference. Digital Imaging Systems Operating Instructions (For Copier & Network Scanner) DP-3510/4510/6010 Model No. English...

  • Page 2: Important Information

    IMPORTANT INFORMATION When requesting information, supplies or service always refer to the model and serial number of your machine. The model and serial number plate (Main Name Plate) is located on the rear side of machine. For your convenience, space is provided below to record information you may need in the future. Model No.

  • Page 3: Useful Office Functions

    Useful Office Functions DP-3510/4510/6010 Operating Instructions This copier includes operating instruction manuals, please use the correct manual when an operator intervention is necessary. <Copier & Network Scanner> Use the information provided in this manual whenever a copier function requires intervention. For example: how to make copies, add paper, replace the toner bottle, etc..

  • Page 4: Operation Chart

    Operation Chart Common Features and Usage I I I I I Basic Operation Original Load Paper Turn the Power Switch On I I I I I Position of the Original From i-ADF i-ADF Tray Original Guides Adjust to the original’s width I I I I I Commonly Used Functions and Operating Procedures Full Size...

  • Page 5: Touch Panel Display

    Touch Panel Display I I I I I Function Categories Tab Name C Initial “Ready to copy” screen. C Original Mode, Exposure Control and Paper Tray BASIC MENU selection. C Job selection (Tandem/Remote, Proof Set and etc.). C Reserved Job(s) verification. 2-SIDED/ORIG.

  • Page 6: Energy Star

    “power down” after a specified period of non-use. The use of this NERGY environment. The default functions can be adjusted depending on your office requirements. Please ask your authorised Panasonic dealer for more details. ® Partner, Panasonic has determined that this product meets the ®...

  • Page 7: Table Of Contents

    Table of Contents Getting To Know Your Machine Operation Chart ... 4 Common Features and Usage ... 4 Touch Panel Display ... 5 Before Starting Precautions ... 9 Control Panel ... 13 Touch Panel Display ... 14 Making Copies Basic Menu ... 16 Full Size Copying ...
  • Page 8 Table of Contents Making Copies Other Features ... 55 Combined Function Table ... 59 Function ... 60 Options Accessories ... 82 Network Scanner (Option) ... 97 Problem Solving Problem Solving ... 105 Troubleshooting ... 119 Others Specifications ... 122 Options and Supplies ... 126 Index ...

  • Page 9: Precautions

    Precautions For Your Safety I I I I I Laser Safety LASER SAFETY This unit employs a laser. Only qualified service personnel should attempt to service this device due to possible eye injury. CAUTION: USE OF CONTROLS, ADJUSTMENTS OR PERFORMANCE PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

  • Page 10: Toner And Paper

    55 - 133 g/m ) paper. C For optimum performance, it is recommended that only Panasonic Brand supplies are used in the copier. The copier should be installed in a well-ventilated area to minimize the ozone density in the air.

  • Page 11: For Your Safety

    Installation FOR YOUR SAFETY The maximum power consumption is 1.45 kW. A properly wired (grounded), dedicated, 6.5A, 220-240V AC outlet is required. Do not use an extension cord. Caution Note: Disconnect from the mains supply before removing covers. CAUTION CTHIS PRODUCT CONTAINS A LITHIUM BATTERY. DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED.
  • Page 12 If you lose the fuse cover the plug must not be used until a replacement cover is obtained. A replacement fuse cover can be purchased from your local Panasonic Dealer. IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE SOCKET OUTLET IN YOUR OFFICE THEN THE FUSE SHOULD BE REMOVED AND THE PLUG CUT OFF AND DISPOSED OF SAFELY.

  • Page 13: Control Panel

    Control Panel ∗ B4·FLS ORIGINAL COPY SIZE Keys SIZE Keys COPY Key C Press when using the unit as a photocopier. ENERGY SAVER Key C Can save power while the copier is not in use. INTERRUPT Key C Interrupts other copy or print jobs while making copies. FUNCTION Key &...

  • Page 14: Touch Panel Display

    Control Panel Touch Panel Display C Use only soft finger pressure to activate the Touch Panel Display. DO NOT ATTENTION USE SHARP OBJECTS such as pens, fingernails etc., as this may damage the panel. Touch Panel B4·FLS Display...
  • Page 15 Touch Panel Display Indications Warning Indications ?: Add Toner k: Add Paper 2: Call Service B: Waste Toner (Call Service) Original Icon Original Size Indication & SADF/Multi-Size Feed Mode Indication Rotate Mode Indication Number of Copies Machine / User Error Code Indication (E1-01, U13, etc.) Copy Icon Copy Size Indication Reserve a Job Button...

  • Page 16: Basic Menu

    Basic Menu Full Size Copying I I I I I Copying the Same Size Originals (1:1) Copy size is automatically selected. Place the Original(s) I I I I I Initial Screen (When placing A4 size originals) JOB SETTINGS button C Each setting selected will be indicated on the display. I I I I I Manually Selecting Exposure Control or Original Size B4·FLS...

  • Page 17: Notice For I-Adf

    ATTENTION C Certain types of transparency film may not be compatible and may damage your machine. Consult with an authorised Panasonic dealer for advice regarding non-standard paper types. (Panasonic has tested “3M PP2500” transparency film and found it to be compatible.)

  • Page 18: Reduction Or Enlargement Copying

    Basic Menu Reduction or Enlargement Copying I I I I I Copying with Preset Ratios Place the Original(s) C If the desired copy size is different from the paper size loaded in the paper tray, use NOTE sheet bypass. (See page 17) C Press the RESET key to cancel the reduction or enlargement mode.

  • Page 19: Proof Copying

    Proof Copying I I I I I Proof Copying Allows you to make one proof set, before proceeding to copy a large multi-set with various settings. B4·FLS Place the COPY SIZE Original(s) (Reduction/ (Up to 70) Enlargement Only) C Press the PROOF SET button again if the Proof Copying mode was reset. NOTE C Numbers in parenthesis “( )”...

  • Page 20: Tandem/Remote Copying

    C All of the copying sets will be printed on other copiers in the network. (Remote Copying) Place the Original(s) C The selected Remote printing copier, must be either DP-6010, DP-4510 or NOTE DP-3510. For the copier to function as a Remote/Tandem Copier it has to be setup in advance.

  • Page 21: Tandem/Remote Copy Settings (Registering)

    Then enter the machine name by using the QWERTY keyboard then touch the OK button. (Up to 15 characters) Ex: Panasonic Then enter the key name (up to 15 characters). (By default, the key name will be up to 15 characters of the station’s name.

  • Page 22: Tandem/Remote Copy Settings (Registration)

    Tandem/Remote Copy Settings (Registration) I I I I I If you want to print from a Remote printing copier, either DP-3510, DP-4510 or DP-6010 that is installed on a network with a different subnet mask, the Station (Machine Name) will not be displayed for selection in the Touch Panel.

  • Page 23: Tandem/Remote Copy Settings (Editing)

    Then enter the new machine name by using the QWERTY keyboard then touch the OK button. (Up to 15 characters) Ex: DP-6010 SALES Then enter the new key name (up to 15 characters). (By default, the key name will be up to 15 characters of the station’s...

  • Page 24: Tandem/Remote Copy Settings (Deleting)

    Basic Menu Tandem/Remote Copy Settings (Deleting) I I I I I To delete the registered machine. Use the same procedure as the Registration of the selected machine. (See page 22) Scroll to screen 05/05 and select 22 Delete tandem desti. Select the registered machine name and touch the OK button.

  • Page 25: Job Queue

    Job Queue I I I I I Can refer to a job list waiting for printing, delete or change of priority (only for print job). I I I I I Procedure Ex. Delete print job. C The PRINT JOB QUEUE requires the Key Operator’s Password, however, the NOTE COPY JOB QUEUE does not require a password.

  • Page 26: Completion Notice

    The PC IP Addresses will be automatically displayed into the Address Book on your network (contact your network administrator for detail). C Before using the Completion Notice, install the Panasonic-DMS included with the machine. Then, set the Status Monitor as follows;...

  • Page 27: 2-Sided/Original \ Copy

    2-Sided/Original \ Copy 2-Sided/Orig. \ Copy Button I I I I I Initial Screen C Touch the desired button to select a function. 1 \ 2 2 \ 1 2 \ 2 BOOK \ 2 2 PAGE N in 1 BOOKLET MULTI-SIZE FEED...

  • Page 28: 2, 2 \ 1, 2 \ 2 Copy

    2-Sided/Original \ Copy 1 \ \ \ \ \ 2, 2 \ \ \ \ \ 1, 2 \ \ \ \ \ 2 Copy 1 \ \ \ \ \ 2 Copy From 1-Sided originals to 2-Sided copies. (From Copier Platen or i-ADF) I I I I I Procedure C To reset each menu mode, touch the CANCEL button on the touch panel.

  • Page 29: Book \ 2 Copy

    Book \ \ \ \ \ 2 Copy Book \ \ \ \ \ 2 Copy From book originals to 2-Sided copies. Except A4, A5 sizes. (BOOK FORMAT) B4·FLS Place the Original COPY SIZE (Reduction/ on the Platen Enlargement Only) Platen C To reset each menu mode, touch the CANCEL button on the touch panel.

  • Page 30: Page Copy

    2-Sided/Original \ Copy 2 Page Copy 2 Page Copy Copying two facing pages or a A3 size original on two separate A4 size sheets. I I I I I Procedure Place the Original Platen Example: A3 size original C To reset each menu mode, touch the CANCEL button on the touch panel. NOTE B4·FLS COPY SIZE...

  • Page 31: N In 1 Copy

    N in 1 Copy 2 in 1 Copy From two 1-Sided originals, side by side, to 1-Sided pages. I I I I I 2-Sided Copy From 4/8/16 1-Sided originals, side by side, to 2-Sided copies. I I I I I Procedure i-ADF Face-Up...
  • Page 32 2-Sided/Original \ Copy N in 1 Copy I I I I I N in 1 Copy Combination for N in 1 copy operation. Mode 2 in 1 4 in 1 8 in 1 Originals 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 Layout...

  • Page 33: I Booklet Copy

    Booklet Copy Booklet Copy Formats output in order so document can be folded and/or saddle stitched like a book. I I I I I Procedure i-ADF Face-Up Place the COPY SIZE Originals (Reduction/ Enlargement Only) & % Select Binding mode. ∗...

  • Page 34: Multi-Size Feeding

    2-Sided/Original \ Copy Multi-Size Feeding Use this function when copying mixed A3/A4 size originals using the i-ADF. Original size can be detected automatically then can be copied full size (1:1) or same size. I I I I I Procedure Originals C Multi-Size Feeding function cannot be combined except SADF in another NOTE 2-sided/original \ copy function.

  • Page 35: Sadf Mode

    SADF Mode I I I I I SADF (Single Sheet Automatic Document Feeder) Function This mode adds a 5 second delay to allow another original to be placed on the i-ADF. Special originals (like thin paper, etc.) can be fed from the i-ADF Tray and copied continuously using the SADF Mode.
  • Page 36 2-Sided/Original \ Copy SADF Mode Example: To make 5 sets of sorted copies of 100-sheet of originals. (a) Place the first 70 sheets of originals on the i-ADF Tray. (b) Touch the 2-SIDED/ORIG. \ COPY menu and select SADF. (c) Touch the SORT/FINISH menu and select the desired sorting/finishing end result. (d) Press the START key.

  • Page 37: Sort/Finish

    Sort/Finish Sort/Finish Button I I I I I When using Sort Mode without optional Finisher 1. Features Sort 2. Operation i-ADF Face-Up Place the Originals ∗ Rotate-Sort and Rotate-Group functions are available for A4 size only. NOTE Rotate-Sort Rotate-Group B4·FLS Select SORT/ Select Finishing FINISH mode...

  • Page 38: Zoom/Effects

    Zoom/Effects Zoom/Effects Button I I I I I Initial Screen C Touch the desired button to select a function. ZOOM AUTO ZOOM EDGE BOOK MARGIN STAMPING CENTERING IMAGE REPEAT INVERSE C For combining Zoom/Edit functions and other functions, see page 59. NOTE C To reset Zoom/Effects mode, press the RESET key.

  • Page 39: Zoom Copying

    Zoom Copying I I I I I Zoom Copies with variable zoom ratios from 25 % to 400 % in 1 % increments. B4·FLS Place the Select ZOOM/ Original(s) EFFECT Mode C When changing the paper size after setting the zoom ratio, please use the ATTENTION PAPER TRAY button.

  • Page 40: Auto Zoom Copying

    Zoom/Effects Auto Zoom Copying I I I I I Auto Zoom The copy Zoom Ratio adjusts automatically to the selected paper size. Place the Original on the Platen ∗ For the Auto Zoom function to work properly when using the skyshot mode, open the NOTE i-ADF.

  • Page 41: Edge/Book/Margin

    Edge/Book/Margin I I I I I Procedure B4·FLS Place the Select ZOOM/ Original(s) EFFECT Mode Edge Book Margin ∗ Initial setting (Factory setting) can be changed by the function mode. NOTE (See page 62) ∗∗ If a part of the copied image is missing when using the Margin mode, change the Margin Reduction setting to Yes.

  • Page 42: Stamping

    Zoom/Effects Stamping (Page Numbering) I I I I I Feature The page number can be automatically printed on each page. Place the Originals (i-ADF) ∗ The page numbering format can be changed in function mode. NOTE (See page 63) C The i-ADF is required for Page Numbering. C To reset each mode menu, touch the CANCEL button on the touch panel.

  • Page 43: Stamping (Date Stamp)

    Stamping (Date Stamp) I I I I I Feature The date can be automatically printed on each page. 01/01/2001 B4·FLS Place the Originals Select ZOOM/ (i-ADF) EFFECT Mode C The i-ADF is required for Data Stamp. NOTE C To reset each menu mode, touch the CANCEL button on the touch panel. Select Stamping Number of Copies...

  • Page 44: Stamping (Issue Number Stamping)

    Zoom/Effects Stamping (Issue Number Stamping) I I I I I Feature The issue number can be automatically printed on each page. Place the Originals (i-ADF) C The i-ADF is required for Issue Number Stamping. NOTE C To reset each menu mode, touch the CANCEL button on the touch panel. C Multiple copy sets will be sorted automatically.

  • Page 45: Centering/Image Repeat/Inverse Copy

    Centering/Image Repeat/Inverse Copy I I I I I Centering Copy image can be centred automatically on selected paper. I I I I I Inverse Negative/Positive image can be made for interesting effects. I I I I I Procedure B4·FLS Place the Select ZOOM/ Select Centering, Original(s)

  • Page 46: Insertion/Overlay

    Insertion/Overlay Insertion/Overlay Button I I I I I Initial Screen C Touch the desired button to select a function. COVER PAGE INSERTION OHP INTERLEAVING PRESENTATION OVERLAY FILE EDIT FORM OVERLAY C To reset INSERTION/OVERLAY, press the RESET key. NOTE C The i-ADF is required for PAGE INSERTION/OVERLAY. Adds cover page(s) to the copies.

  • Page 47: Cover

    Cover I I I I I Cover Adds cover page(s) to the copies. Blank Original Paper I I I I I Procedure i-ADF Face-Up Place the Originals Select INSERTION/ (Up to 70; 80 g/m paper) OVERLAY mode and select Cover mode C To reset each menu mode, touch the CANCEL button on the touch panel.

  • Page 48: Page Insertion

    Insertion/Overlay Page Insertion I I I I I Page Insertion Insert paper between the copies. Original I I I I I Procedure Place the Originals (Up to 70) C To reset each menu mode, touch the CANCEL button on the touch panel. NOTE Blank Original...

  • Page 49: Ohp Interleaving

    NOTE C Certain types of transparency film may not be compatible and may damage your machine. Consult with an authorised Panasonic dealer for advice regarding non-standard paper types. (Panasonic has tested “3M PP2500” transparency film and found it to be compatible.)

  • Page 50: Presentation

    Insertion/Overlay Presentation I I I I I Presentation Inserts paper between OHP film and make copied sets for hand-outs. Blank Original Paper I I I I I Procedure Place the OHP (Sheet Bypass) C To reset each menu mode, touch the CANCEL button on the touch panel. NOTE Original OHP1...

  • Page 51: I Overlay

    Overlay Overlay Overlays a second image onto the first by using a second original. 1st-page I I I I I Procedure i-ADF Face-Up Place the Select INSERTION/ Originals OVERLAY Mode (Up to 70) C Do not turn Off the power switch if the file has been stored, otherwise the file ATTENTION will be erased.

  • Page 52: I File Edit

    Insertion/Overlay File Edit File Edit There are three File Edit available in the Form Overlay function. Register: To Add a new file I I I I I Procedure Place the Select INSERTION/ Original OVERLAY Mode (Register) File Key REGISTER # Touch each File Key then, touch the REGISTER button.

  • Page 53: I Form Overlay

    Form Overlay Form Overlay Overlay an image stored in memory onto the copier. File I I I I I Procedure B4·FLS Place the Select INSERTION/ Original OVERLAY Mode Select Form Overlay mode C Function to select the files is only available when the optional Hard Disk NOTE Drive (DA-HD60) is installed.

  • Page 54: Job Memory

    Job Memory I I I I I Five Copy Jobs can be stored in Memory (M1 to M5) for recall at a later time. B4·FLS When touching the M1, M2, M3, M4, or M5 button, recalled job stored in memory will be display at the job setting area.

  • Page 55: Other Features

    Other Features Concurrent Copying I I I I I Concurrent Copying (Requires the optional Hard Disk Drive/DA-HD60 to be installed) Next copy job can be reserved even if the current copy job is not completed, as long as the scanning was completed. B4·FLS Place the Select...

  • Page 56: Energy Saver/Interrupt

    Other Features Energy Saver/Interrupt B4·FLS ENERGY SAVER INTERRUPT C Energy saver time (15 minutes) and Sleep/Auto Off time (90 minutes) can be changed NOTE by the key operator. (See page 67) C Sleep Mode and Auto Off Mode can be selected by the key operator. (See page 70) Normal Operation Energy Saver Mode Sleep Mode...

  • Page 57: Skyshot Mode

    Skyshot Mode I I I I I Skyshot allows copying a manuscript without generating dark borders even if the platen cover or ADF is opened. Skyshot mode eliminates dark borders around the originals, and is especially convenient for copying small-sized originals like bank checks or documents with unusual shapes (round, oval, etc.).
  • Page 58 Other Features Skyshot Mode I I I I I Manual Skyshot Mode When using this function, the custom size should be registered into memory (M1, M2) in advance. C C C C C Set 07 Manual Skyshot Mode in Copier Settings first. (See page 53) Platen Upper- Left...

  • Page 59: Combined Function Table

    Combined Function Table 2-SIDED/ORIG. \ \ \ \ \ COPY Next Selections First Selections 1 \ \ \ \ \ 2 A A A A A A A ✕ b b b b b b b b b b b b b b b ✕ b b b b A A b b A b b A b 2 \ \ \ \ \ 1 A A A A A A A ✕...

  • Page 60: Function

    Function I I I I I Using Function Modes to change the Initial Copy Modes GENERAL FUNCTIONS General Functions for Key Operator I I I I I Procedure C Please refer to each operating instructions for options function settings. NOTE COPIER PRINTER SETTINGS...

  • Page 61: General Functions

    GENERAL FUNCTIONS I I I I I Using Function Modes to Change the Initial Machine Modes Screen Modes 00 Power on default mode 01 Manual add toner 02 Sort memory status 01/01 03 Department counter 04 Set key operator code Function Selects mode.

  • Page 62: Copier Settings

    Function COPIER SETTINGS I I I I I Using Function Modes to change the Initial Copy Modes Screen 00 Margin value default 01 Edge value default 02 Book value default 01/04 03 Margin reduction default 04 2-sided mode default 05 Reduce N in 1 for space 06 Digital skyshot mode 07 Manual skyshot mode 02/04...
  • Page 63 I I I I I Using Function Modes to change the Initial Copy Modes Screen Modes 11 Booklet default magnification 12 Sort mode default ADF copy 03/04 13 Sort mode default FB copy 14 Staple position setting 15 Stamping default mode 16 Page numbering style 04/04 17 Hole punch default...

  • Page 64: Scanner Settings

    Function SCANNER SETTINGS I I I I I Using Function Modes to change the Initial Scanner Modes Screen 00 Original mode default 01 Compression mode default 02 Resolution default 01/02 03 SADF mode 04 Bind position, 2-sided original 05 Add new address 06 Edit address book 02/02 07 Delete address...

  • Page 65: Printer Settings

    PRINTER SETTINGS I I I I I Using Function Modes to change the Initial Printer Modes Screen Modes 00 Number of prints 01 Paper Size 02 Paper Tray 01/04 03 Print direction 04 Auto tray selection 05 2-sided print 06 Bind position 07 Resolution 02/04 08 Font (PCL)
  • Page 66 Function PRINTER SETTINGS I I I I I Using Function Modes to change the Initial Printer Modes Screen 10 Pitch (PCL) 11 Point size (PCL) 12 Lines/Page (PCL) 03/04 13 Return character (PCL) 14 Mutual A4/LTR 15 Mailbox memory status 16 Print data 04/04 19 Set key operator code...

  • Page 67: General Functions For Key Operator

    GENERAL FUNCTIONS for Key Operator I I I I I Input the Key Operator ID Code to change Settings Screen Modes 00 Paper Size 01 Auto reset time 02 Power save mode timer 01/09 03 Sleep/off mode timer 04 Language default 05 Special paper tray 1 06 Special paper tray 2 02/09...
  • Page 68 Function GENERAL FUNCTIONS for Key Operator I I I I I Input the Key Operator ID Code to change Settings Screen 10 Auto paper out rotate 11 Beep sound in Touch Panel 12 Original set beep sound 03/09 13 Original set beep sound in ADF 14 Dept.
  • Page 69 I I I I I Input the Key Operator ID Code to change Settings Screen Modes 20 Date time setting 21 Weekly-timer 22 DHCP default 05/09 23 TCP/IP address 24 TCP/IP subnet mask 25 TCP/IP default gateway 26 DNS server address 06/09 27 Hard disk format 28 Hard disk error check...
  • Page 70 Function GENERAL FUNCTIONS for Key Operator I I I I I Input the Key Operator ID Code to change Settings Screen 30 Sleep/Off mode selection 31 General settings print 32 Corona wire cleaning 07/09 33 MAC address 34 Address book group ID 35 Tandem user parameter 36 Community Name(1) 37 Community Name(2)

  • Page 71: Copier Settings For Key Operator

    Copier Settings for Key Operator I I I I I Input the Key Operator ID Code to change Settings Screen Modes 00 Paper size priority 01 Original mode default 01/05 02 Text contrast 03 T/P contrast 04 Photo contrast 06 Interleaving default 07 Page insertion default 08 Cover mode default 02/05...
  • Page 72 Toner will be saved when selecting the Level 1 or 2 but copy quality will be dropped less than None mode when selecting the Level 1 or 2. Save value (Panasonic authorised 6 % density original): Level 1: maximum approximately 10 % less than None mode.
  • Page 73 I I I I I Input the Key Operator ID Code to change Settings Screen Modes 20 Add new tandem destination 21 Edit tandem destination 05/05 22 Delete tandem destination 23 Copier settings print C It is necessary to input the Key Operator ID code before changing items on NOTE this page.

  • Page 74: Printer Settings For Key Operator

    Function Printer Setting for Key Operator I I I I I Input the Key Operator ID Code to change Settings Screen 00 Job completion time 01 Page protection 02 Error page print 01/03 03 Spool function 04 Text print 05 PS Configuration print 06 Printer settings print 07 Font list print (PCL) 02/03...

  • Page 75: Function Setting For Key Operator

    Function Setting for Key Operator I I I I I Changing the Auto Contrast Setting You can select whether the copying density is adjusted automatically for text and photographic originals. Press the FUNCTION Key. B4·FLS Proceed as Follows: FUNCTION Key # Touch COPIER SETTINGS.

  • Page 76: Changing The Paper Size

    Function Function Setting for Key Operator I I I I I Changing the Paper Size The paper trays are designed to accommodate A5, A4, A4 R, B4/FLS and A3 Size paper. To change the paper size, perform the steps shown below. It is not required to take step 1 and 2 when selecting Tray 2.
  • Page 77 Changing the Paper Guide and Paper Size Indicator in the Paper Tray C It is recommended that the paper guide b be fixed in place with screws. NOTE Consult an authorised servicing dealer for details on how to fasten using screws.

  • Page 78: Department Counter

    Function Function Setting for Key Operator I I I I I Department Counter Key Operator can manage, limit copies, counters and code numbers for each department. (Maximum department number: 300) Press the FUNCTION Key. Proceed as Follows: # Touch GENERAL FUNCTIONS. $ Touch 04 Set key operator code button.
  • Page 79 Change the Department Counter Number, ID Code and limit the Maximum Number of Copies Exit function mode Number of Department Counter # Touch the DEPT. COUNTER button. $ Select the desired department using the scroll button. % Input “0” to clear the counter. &...
  • Page 80 Function Function Setting for Key Operator I I I I I Weekly Timer Key Operator can manage each on/off time in a week. Press the FUNCTION Key. Proceed as Follows: # Touch GENERAL FUNCTIONS. $ Select 04 Set key operator code button. % Input ID Code (4 digits) and touch the OK button.

  • Page 81: Network Settings

    I I I I I Network Settings Key Operator can manage Network settings for Network functions. Press the FUNCTION Key. B4·FLS Proceed as Follows: # Touch GENERAL FUNCTIONS. $Select 04 Set key operator code button. % Input ID Code (4 digits) and touch the OK button. &...

  • Page 82: Accessories

    Accessories Components 2-Bin Finisher (DA-FS330 for DP-3510) (DA-FS600 for DP-4510/6010) (See page 83-85, 88) 1-Bin Saddle-Stitch Finisher (DA-FS355 for DP-3510) (See page 92) 2-Bin Saddle-Stitch Finisher (DA-FS605 for DP-4510/6010) (See page 83-87) Punch Unit for DA-FS600/605 (DA-SP31) (See page 83, 87) Punch Unit for DA-FS355 (DA-SP41) (See page 95)

  • Page 83: Bin Finisher (Da-Fs600)/2 Bin Saddle-Stitch Finisher (Da-Fs605)

    2 Bin Finisher (DA-FS600)/2 Bin Saddle-Stitch Finisher (DA-FS605) 1. Operation (1) Bin Capacity (sheets) Modes Paper Size Staple-sort A4 R, B4, A3 Non-sort A4, A5* A4 R, B4, FLS*, A3 Shift-sort Shift-group ∗ A5, FLS size is not applicable for Shift-sort and Shift-group. (2) Saddle Stitcher Tray Capacity Item Paper Size...
  • Page 84 Accessories 2 Bin Finisher (DA-FS600) / 2 Bin Saddle-Stitch Finisher (DA-FS605) 2. Features Shift-group C Shift electronic sort copy (A3, B4, A4, A4 R) 3. How to use i-ADF Face-Up Platen Face-Down The Shift-Sort is not available in the first set when the memory is full. A5 size is not applicable for Shift-sort and Shift-group.
  • Page 85 4. Replacing the Staple Cartridge Staple Cover Staple Cartridge Replace the Staple Case. Empty Tape Accessories The message shown on the left appears when the staples run out. Reinstall the Staple Cartridge. Insert the staple cartridge until the lever locks. Close the Stapler Cover.
  • Page 86 Accessories 2 Bin Saddle-Stitch Finisher (DA-FS605) When supplying the saddle stitcher unit with staples Supplying the Saddle Stitcher Unit with Staples Green Handle Stitcher Unit Lower Front Cover Empty Cartridge New Cartridge Stitcher Unit Until it stops Close the Lower Front Cover.
  • Page 87 If the unit fails to staple after replacing the Staple Cartridge, follow the instructions below. Remove the Staple Cartridge. Staple Cartridge Residual Staple Accessories I I I I I When the punch hole residue container is full (For Punch Unit/DA-SP31) When the punch hole residue indicator lights up, this indicates that the container is full.

  • Page 88: I 2 Bin Finisher (Da-Fs330)

    Accessories 2-Bin Finisher (DA-FS330) 1. Components Upper Bin C Hole punch C A5R/A4/A4R/B4/FLS/A3 Lower Bin C A4 size only (Except A4 C) C Stapling (Up to 30 sheets) C Shift electronic sort C Hole Punch 2. Features IUpper Bin C Sort by rotating sets ILower Bin C Offset using electronic sorting...
  • Page 89 3. How to use i-ADF Face-Up Platen Staple Position (ex. $-1) Face-Down ∗ In the 4 hole punch mode, A3 size and A4 B size are available. C The above sort modes may not work if you are using gray originals, as this NOTE may cause a memory overflow.
  • Page 90 Accessories 2-Bin Finisher (DA-FS330) 4. Replacing the staple cartridge Stapler Unit Replace the Staple Case. Stapler Cover Lock Lever Staple Cartridge Empty The message shown on the left appears when the staples run out. Tape # Close the stapler cover. $ Return the finisher to the original position.
  • Page 91 5. If the unit fails to staple after replacing the staple follow the instruction below. Jammed Staple 6. Punch disposal Trash Box Remove the staple cartridge according to staple replacing procedures steps 1 to 4. (See page 90) Reinstall the staple cartridge according to staple replacing procedures steps 7 to 10 and check operation.

  • Page 92: I 1 Bin Saddle-Stitch Finisher (Da-Fs355)

    Accessories 1-Bin Saddle-Stitch Finisher (DA-FS355) 1. Components C Hole Punch C Staples Stitch Tray C Saddle Stitcher Tray 2. Features (1-Bin Finisher) Shift-group C Shift electronic sort copy C A5, FLS size is not applicable for Shift-sort and Shift-group. Shift-sort Staple-sort C Staple electronic C Stack by punch...
  • Page 93 2. How to use i-ADF Face-Up Platen Staple Position (ex. $-1) Face-Down ∗ The Shift-Sort is not available in the first set when the memory is full. A5 size is not applicable for Shift- sort and Shift-group. C If output sheets are curled, or not properly aligned, remove the paper from NOTE the paper tray, turn it over, and replace it in the paper tray.
  • Page 94 Accessories 1-Bin Saddle-Stitch Finisher (DA-FS355) 4. Replacing the staple cartridge Finisher Front Cover Blue Mark Stapler Unit Staple Cartridge Empty Staple Case The message shown on the left appears when the staples run out. New Staple Case Tape Staple Cartridge Stapler Unit Close the Finisher Front Cover.
  • Page 95 5. If the unit fails to staple after replacing the staple follow the instruction below. 6. Punch disposal Accessories Remove the staple cartridge according to staple replacing procedures steps 1 to 4. (See Page 94) # Lift up the Cartridge Knob. $ Remove the jammed staple.
  • Page 96 memo...

  • Page 97: Network Scanner (Option)

    Network Scanner (Option) Document Scanning I I I I I Document Scanning To use the Network Scanner feature, you must first install and configure the included Panasonic Document Management System (PDMS) onto you PC. B4·FLS Place the Press the SCAN/...

  • Page 98: Address Book

    Network Scanner (Option) Address Book I I I I I Adding a New PC’s IP Address Inputting PC IP Addresses for PC Scanning into the Address Book. To add a new IP Address for a PC, follow the steps below Button Name CAPS NUMERIC/...
  • Page 99 ∗ If you select DD, input will be noticed as DD server. (See page 103 ) NOTE C If you make a mistake, use I or H to move the cursor beyond the incorrect character, press CLEAR then re-enter the new character. C The Address Book cannot be changed or erased until the communication has finished.

  • Page 100: Editing The Address Book

    Network Scanner (Option) Address Book I I I I I Editing the Address Book If you have to change or erase any of the Address Book stations, follow the steps below. To change the settings of an Address Book station Press Function Key.
  • Page 101 “C” (CLEAR) key, then re-enter a new character. Network Scanner (Option) Delete the current station name using the Back Space button. Then enter a new station’s name. Ex: PANASONIC Delete the current button name using the Back Space button. Then enter a new button name. Ex: PANASONIC...
  • Page 102 Network Scanner (Option) Address Book To delete an entry from the Address Book Touch the Function Key. Touch the Scanner Settings button and touch “07 Delete address”. Enter the station you wish to delete and touch the OK button. Ex: SALES DEPT Touch YES.

  • Page 103: Adding The Dd Server Ip Address

    I I I I I Adding the DD Server IP Address Input the DD Server’s IP Address into the Address Book. To add the DD Server IP Address, follow the steps below Network Scanner (Option) Use the same procedure as Adding a New PC’s IP Address.
  • Page 104 Network Scanner (Option) Address Book C The same procedure as “Adding DD Server IP Address” mentioned above will be NOTE applied for Editing and Erase. Then enter the directory name, using the QWERTY keyboard. (Up to 60 characters) Ex: SALESDEPT * Do not change the default Port Number without your Network Administrator’s approval.

  • Page 105: Problem Solving

    Problem Solving Adding Paper (k k k k k ) I I I I I 550-Sheet Paper Tray Place the paper with the copying surface facing down. C Special papers, like glossy paper, mailing labels and transparencies cannot be used in the Paper Tray.

  • Page 106: Adding Paper

    Problem Solving Adding Paper I I I I I 3000 Sheet Large Capacity Paper Tray (LCT) (DA-MA301) Paper Feed Tray Do not touch the tray while it is moving. Face-Up After tray stops, place paper neatly on the tray. A4 size only (portrait). Up to 3000 sheets, 75 g/m Close the door.

  • Page 107: Replacing The Toner Bottle (?)

    Empty Toner Bottle New Toner Bottle 10 to 15 times C For optimum copy quality use the recommended Panasonic toner. Store ATTENTION toner in a cool dark place. Do not unseal toner before use. Use it as fast as possible after unsealing.

  • Page 108: Removing A Misfed Paper

    Problem Solving Removing a Misfed Paper I I I I I Paper Misfeed Indicators and Locations When a paper misfeed occurs, the Misfeed Indicator and the misfeed location(s) will be displayed on the Touch Panel Display. DA-FS330 DA-FS355 Paper Misfeed Locations Finisher Copier Paper Feed Unit...
  • Page 109 Misfed Paper Finisher Push Release button When the Punch Unit is installed: Punch Cover Problem Solving I 2-Bin Finisher (DA-FS600/FS605) C Make sure that the Misfeed Indicator resets after removing all misfed paper. Misfed Paper Punch Cover Finisher Upper Cover Inner Cover Misfed Paper Transport...
  • Page 110 Problem Solving Removing a Misfed Paper I 2-Bin Saddle-Stitch Finisher C Make sure that the Misfeed Indicator Finisher Push Release button Lower Front Cover Push and Turn (DA-FS605 only) resets after removing all misfed paper. Misfed Paper Saddle Exit Cover Misfed Paper Infeed Cover...
  • Page 111 Upper Cover Misfed Paper # Pull out the finisher. $ Pull out the trash box. (See Page 87) % Open the stapler cover. (See Page 86) Knob A Misfed Paper Problem Solving I I I I I 2-Bin Finisher (DA-FS330) C Make sure that the misfeed indicator resets after removing all misfed paper.
  • Page 112 Problem Solving Removing a Misfed Paper Upper Cover I I I I I 1-Bin Saddle-Stitch Finisher (DA-FS355) C Make sure that the misfeed indicator resets after removing all misfed paper. Misfed Paper Return the finisher to original position. Finisher Upper Cover...
  • Page 113 Misfed Paper Finisher Front Cover Lower Knob Stitch Tray Close the Finisher Front Cover. Problem Solving I I I I I 1-Bin Saddle-Stitch Finisher (DA-FS355) C Make sure that the misfeed indicator resets after removing all misfed paper. Inner Cover Misfed Paper Return the finisher to original position.
  • Page 114 Problem Solving Removing a Misfed Paper I Paper Transport Area Transport Release Lever Ensure to close the Front Cover. I Paper Entry Area Paper Transport Knob Push and Turn Right Cover Misfed Paper Push back the Paper Tray 1 or 2. Close the Right Cover.
  • Page 115 Front Cover Exit Cover Fuser Knob Left Cover Problem Solving I Paper Exit/Fuser Area C Make sure that the Misfeed Indicator resets after removing all misfed paper. Magnet Heat Roller Cover Caution heated surface Ensure to close the Heat Roller Cover, Exit Cover and the Front cover.
  • Page 116 Problem Solving Removing a Misfed Paper Transport Release Lever Automatic Duplex Unit Knob 5 (Centre) I Automatic Duplex Unit (ADU) C Make sure that the Misfeed Indicator resets after removing all misfed paper. Knob 5 (Right) Knob 5 (Left) Push back the ADU into the copier. Push and turn Ensure to close the Front Cover.
  • Page 117 I System Console (DA-DS601/DS602) Right Cover Lower Misfed Paper Push back the Paper Tray 3 or 4. Close the Right Cover Lower. Problem Solving I I I I I Large Capacity Paper Tray (DA-MA301) # Hold the latch and slide the large capacity paper tray to the right.
  • Page 118 Problem Solving Removing a Misfed Paper Inner Cover ADF Tray Exit Guide I i-ADF C Make sure that the Misfeed Indicator resets after removing all misfed paper. ADF Cover Misfed Paper Green Labelled Tab P9250577 Misfed Paper Exit Guide Misfed Paper Close the ADF.

  • Page 119: Troubleshooting

    Troubleshooting Before Calling Service Check Unit Does Not Operate Does the display light? Does the Energy Saver key flash (or light) and displays are turned OFF? (See page 56) Does any of the U## codes and messages appear on the display? (U1, U4, U6, U7, U9...etc.,) Does the Add Staples indicator and message appear on the display?

  • Page 120: User Error Codes (U Code)

    Troubleshooting Before Calling Service Marked Copies Is the copier Platen Glass or Platen Sheet dirty? Is the original an OHP film or a dark original? I User Error Codes (U Code) Code Front Cover is open. Finisher is pull out. Right Cover is open.

  • Page 121: Replacing The Battery

    Troubleshooting Replacing the Battery The copier has an internal battery (Product No.: CR2032) which maintains the date and time. In the event the battery requires replacement, the following message will be displayed. I I I I I Battery Replacement Message I I I I I Battery Replacement Procedure Data LED Data LED...

  • Page 122: Specifications

    Specifications I I I I I DP-6010/4510/3510 (Copier) Type Platen Type Acceptable Originals Copying Method Fixing Method Imaging Method Resolution Operation Panel Maximum Copy Size Void Area Warm Up Time First Copy Time Multi-Copy Speed Enlargement Ratios Reduction Ratios Paper Feed...
  • Page 123 I I I I I i-ADF (Standard) Maximum 70 sheets 80 g/m Tray Capacity Paper Size A5/A4/B4·FLS/A3 Paper Weight 50 - 105 g/m 64 - 105 g/m Electrical Requirements Supplied from the copier Dimensions (W × × × × × D × × × × × H) 600 ×...
  • Page 124 Specifications I I I I I 2-Bin Finisher (DA-FS600) Mode 1 Bin and 2 Bin Paper Size 1 Bin and 2 Bin Paper Weight Paper Capacity 1 Bin and 2 Bin Staple Paper Size Paper Weight Capacity Point Electrical Requirements Dimensions (W ×...
  • Page 125 I I I I I 2-Bin Finisher (DA-FS330) Mode 1 Bin Non-sort/Sort 2 Bin Non-sort/Sort/Staple Paper Size 1 Bin A5/A4/A4 R/B4/FLS/A3 2 Bin 55 - 133 g/m Paper Weight Paper Capacity 1 Bin 100 sheets 2 Bin Maximum: 1000 sheets / 30 set (Stapling mode) Staple Paper Size 64 - 80 g/m...

  • Page 126: Options And Supplies

    Options and Supplies The DP-6010/4510/3510 is a digital photocopier which can produce images with great clarity. Furthermore, its copying functionality can also be greatly enhanced by the addition of the following options and supplies. We hope you find that the wide ranging capabilities will make your office-place more productive and efficient.
  • Page 127 Staple Cartridge FQ-SS32 Toner DQ-TU24D Toner DQ-TU35D Part No. Remarks Staple Cartridge Refills (3) for DA-FS600/605 Staple Cartridge Refills (3) for DA-FS605 (Saddle-Stitch) Staple Cartridge Refills (3) for DA-FS355 Staple Cartridge Refills (3) for DA-FS330 Toner for DP-3510/4510 Toner for DP-6010...

  • Page 128: Index

    INDEX 1 \ 2 Copy ... 28 1-Bin Saddle-Stitch Finisher (DA-FS355) ... 92-95 2 \ 1 Copy ... 28 2 \ 2 Copy ... 28 2 Bin Finisher (DA-FS600) ... 83-90 2 Bin Saddle-Stitch Finisher (DA-FS605) ... 83-90 2 in 1 Copy ... 31 2 Page Copy ...
  • Page 129 N in 1 Copy ... 31 Network Scanner (Option) ... 97-104 Network Settings ... 81 OHP Interleaving ... 49 Operation Chart ... 4 Options and Supplies ... 126-127 Original Icon ... 14, 15 Original Image Indication ... 14, 15, 16 Original Mode Select Button (Text;...
  • Page 130 For Service, Call: Matsushita Electric Industrial Co., Ltd. Osaka 542-8588, Japan S0802 DZSD001600-1 August 2002 Printed in Japan...

This manual is also suitable for:

Dp-3510Dp-4510

Table of Contents