Panasonic DP-2310 Operating Instructions Manual page 128

No.
052 Diagnostic Password
053 Sub Address Password
054 Fax Forward
056 Cover Sheet
057 Country Code
077 Department Code
078 Rotation XMT
082 Quick Memory XMT
086 RINGER VOLUME
089 List Output Tray
095 Duplex Print
097 Special Tray
No.1 - 4
(DP-2310/3010: No.1-3)
099 Memory Size
(Flash Memory)
118 FAX Function Detect
(Only for DP-2310/3010)
140 LAN Relay XMT Request
128
Setting Your Machine
Fax Parameters
Parameter Setting
(----)
(----)
Invalid
Valid
Off
On
Invalid
Valid
Invalid
Valid
Invalid
Valid
Off
Soft
Loud
Upper
Bottom
Invalid
Valid
None
Tray 1
Tray 2
Tray3
Tray 4
LCT
-
Invalid
4-Digits
5-Digits
6-Digits
7-Digits
8-Digits
Invalid
Valid
Setting the password for Remote Diagnostic Mode. Please ask your
Panasonic Authorized Dealer for details.
Setting a 20-digit password for secured sub-address communication.
Selecting whether the machine performs Fax Forwarding to the
specified destination.
Setting the home position of the Cover Sheet parameter in the Select
Mode. (See page 74)
Selecting the country code when installing your machine.
Selecting whether the machine performs the Department Code
operation. (See page 84)
Selecting whether the machine performs rotation transmission.
Selecting whether the machine performs Quick Memory Transmission.
Invalid : Stores all documents into memory first before dialling the
telephone number.
Valid : Starts dialling the telephone number immediately after storing
the first page.
Setting the home position of the ringer volume when your machine
receives a call.
Selecting the Output Tray home position for List printout.
Upper : The List printout exits to the Upper Output Tray.
Bottom : The List printout exits to the Bottom Output Tray.
(DP-2310/3010 : "Inner 1", "Inner 2", "Outer")
Selecting whether the machine performs duplex print when A4/Letter
originals are received.
Select up to 4 Special Trays that will not be used for printing received
faxes (4-Trays, plus LCT configuration). One Tray must always be
available for receiving Faxes.
(You can specify one Tray (1 ~ 4, LCT) for each selection No. 1, No. 2,
No 3 and/or No. 4)
(DP-2310/3010: 4-Trays only)
Displays the amount of base and optional memory installed.
(Base Memory + Optional Memory)
Setting the number of digits for detecting a Fax Telephone number.
Upon detecting the specified number of digits, the machine will
automatically switch to the FAX Mode when it is in the Copier Mode.
Selecting whether the machine performs LAN Relay XMT Request.
Comments