Housing Unit With Internal - Prima LPR808 Users Manual And Installation Handbook

Built in gas
Hide thumbs Also See for LPR808:
Table of Contents

Advertisement

installation instructions - 70cm
Method 3: Housing unit with internal
method 3: Housing unit with internal height
height 710mm or more
710mm or more
Note: You will not need the 4 runners
Note: You will not need the 4 runners and
and 2 trims that are packed with the
2 trims that are packed with the oven for
oven for this installation.
this installation.
703mm
595mm
1. When installed in a typical
1. When installed in a typical 600mm
600mm deep built in housing unit,
deep built in housing unit, the false
the false back should be removed
back should be removed from the
from the housing unit to provide
housing unit to provide the necessary
the necessary depth for installation.
depth for installation.
2. When the false back is removed,
2. When the false back is removed, it is
normally the case that the support
it is normally the case that the
shelf for the appliance leaves a gap
support shelf for the appliance leaves
between the back edge and the wall of
a gap between the back edge and
approximately 80mm.
the wall of approximately 80mm.
3. If no gap occurs between the back
3. If no gap occurs between the back
edge of the shelf and the wall behind
edge of the shelf and the wall
the unit, you must create a gap of at
least 30mm by shortening the shelf.
behind the unit, you must create a
gap
of
at
least
shortening the shelf.
Installation Instructions
547mm
9mm
697
706
mm
mm
12mm gap in
12mm gap in
plinth for air intake
plinth for air intake
550mm
30mm
by
32
Remove any fixings that may prevent
Remove any fixings that may prevent
entry of the oven into housing, or
entry of the oven into housing, or obstruct
obstruct the gas inlet pipe.
the gas inlet pipe. The cabinetry should
cabinetry should be kept structurally
be kept structurally sound by fixing to
sound by fixing to adjacent cabinets,
adjacent cabinets, floor or worktop.
floor or worktop.
560-570mm
min 550mm
min
710
mm
Worktop
space behind
appliance to
be kept clear
12mm air
support
gap in top
shelf
of plinth
The
Rear
wall

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents