Initial Display; Setting The Minute Minder; Setting The “Time Of Day”; Alarm Tones - Prima LPR808 Users Manual And Installation Handbook

using the Minute Minder (if fitted)

Initial display

Minus Function
button select
Use to set
the correct time
The digital timer enables you to set the
The digital timer enables you to set the
time of day (24 hour clock) and the
time of day (24 hour clock) and the minute
minute minder alarm.
minder alarm.
setting the "time of day"
Setting the "Time of Day"
1. Switch on the electricity supply to the
1. Switch on the electricity supply to
appliance.
the appliance.
The display will flash.
The display will flash.
2. Press and release the time of day
2. Press and release the time of day
button.
button.
3. Set the time of day with the plus and
3. Set the time of day with the plus
minus buttons.
and minus buttons.
4. The time will be set 7 seconds after the
4. The time will be set 7 seconds after last plus or minus operation.
the last plus or minus operation.

Alarm tones

Alarm tones
After setting the time of day, you can select
one of three alarm tones.
After setting the time of day, you can
select one of three alarm tones.
Press the minus button to listen to the first
tone, then release the minus button and
Press the minus button to listen to the
press it again to listen to the second tone,
first tone, then release the minus button
etc.
and press it again to listen to the
Releasing the minus button after a tone
second tone, etc.
has sounded will automatically select that
Releasing the minus button after a tone
tone.
has sounded will automatically select
that tone.
Minute Minder (if fitted)

setting the minute minder

1. Press and release the plus button to
change the display from clock to minute
minder - the bell symbol will light.
2. Use the plus and minus buttons to set
Press &
release:
the length of time before the alarm tone
to set
will sound. The display will increase /
the time
decrease in units of 10 seconds up to 99
minutes 50 seconds, and in units of 1
Plus
button minute from 1 hour 40 minutes upwards.
The maximum period which may be set is
10 hours.
The display format will change after 99
minutes and 50 seconds to 1 hour and 40
minutes.
During countdown, the minute minder has
priority on the display, which will show (in
minutes : seconds, or hours : minutes) the
time remaining.
When countdown is complete, the tone will
sound for 7 minutes, or it can be reset with
one touch of any button.
to cancel the minute minder at any other
time, run down the set time with the minus
button.
The display will revert to show the time of
day.
15
Setting the minute minder
1. Press and release the plus button
to change the display from clock
to minute minder - the bell symbol
will light.
2. Use the plus and minus buttons to
set the length of time before the
alarm tone will sound. The display
will increase / decrease in units of
10 seconds up to 99 minutes 50
seconds, and in units of 1 minute
from 1 hour 40 minutes upwards.
The maximum period which may
be set is 10 hours.
The display format will change
after 99 minutes and 50 seconds
to 1 hour and 40 minutes.
During countdown, the minute
minder has priority on the display,
which will show (in minutes :
seconds, or hours : minutes) the
time remaining.
When countdown is complete, the
tone will sound for 7 minutes, or it
can be reset with one touch of
any button.
To cancel the minute minder at
any other time, run down the set time
with the minus button.
The display will revert to show the
time of day.