Table of Contents
Advertisement
08 27224 00 - Prima 60G
Step 4: Check edging strip
The edging strip is factory fitted to
the front side edges of the appliance
front frame.
This strip provides the
c a b i n e t r y with extra protection from
any escape of heat.
When installing the product, ensure
that the edging strip is correctly located
on the outer edges of the front frame,
before positioning and securing the
appliance to the cabinet.
seal
handle
When securing the appliance, the
fixing screws provided are driven
through the edging strips into the
cabinet - the seal will straighten up
and sit flush to the cabinet when the
screws are fully home.
26/1/05
9:22 am
Page 25
Installation Instructions
Step 5: Secure appliance into
housing unit
There are 4 black no 8 x 25mm long
chipboard
appliance to cabinet.
Insert appliance into cabinet and
secure - open the oven door and screw
the 4 screws through the holes in the
front frame.
front frame
door
Note: The unit housing the appliance
must be appropriately fixed.
23
screws
for
securing
Advertisement
Table of Contents
