Event Server Configuration; Ftp Server; Tcp Server - Planet Networking & Communication ICA-HM100 User Manual

3.15 Event Server Configuration

3.15.1. FTP Server

You may setup FTP parameters for further operation of Event Schedule. That's, if users want to
send the alarm message to an FTP server, it will need to configure parameters here and also add
at least one event schedule to enable event triggering as SMTP.
Name
FTP Server
Test
FTP Login name
FTP Login Password
FTP Port
FTP Path
FTP Passive Mode

3.15.2. TCP Server

In addition to send video file to FTP server, the device also can send event message to specified
TCP server.
User can specify multiple FTP paths as wish. Therefore, user
needs to specify a name for each FTP setting.
Type the server name or the IP address of the FTP server.
Check the FTP server whether this account is available or not.
Type the user name for the FTP server.
Type the password for the FTP server.
Set port number of FTP service.
Set working directory path of FTP server.
Select passive or active mode connecting to FTP server.
57