Initial Utility Installation - Planet Networking & Communication ICA-HM100 User Manual

proper network connection, and access to the IP Camera, the LED will flash green under wired
mode or orange under wireless mode.
1. Only use the power adapter supplied with Internet Camera Otherwise, the
NOTE:
product may be damaged.
2. The power adapter is unnecessary when Internet Camera is connected to a
IEEE802.3af PoE switch. Otherwise, the product may be damaged when
Internet Camera is connected to a PoE switch and power adapter
simultaneously.

2.4 Initial Utility Installation

This chapter shows how to quick set up your H.264 camera. The camera is with the default
settings. However to help you find the networked camera quickly the windows utility PLANET IP
Wizard II can search the cameras in the network that shall help you to configure some basic
setting before you started advanced management and monitoring.
1. Insert the bundled CD into the CD-ROM drive to launch the auto-run program. Once
completed, a welcome menu screen will appear.
2. Click the "IP Wizard II" hyperlink; you will see the dialog box as below.
If the welcome screen does not appear, click "Start" at the taskbar. Then, select
NOTE:
"Run" and type "D:\Utility\IPWizard II\setup.exe", assume D is your CD-ROM drive.
3. The "Welcome to the InstallShield Wizard for PLANET IP Wizard II" prompt will display on the
screen and click "Next" to continue.
8