Removing Front Wheel - BMW S 1000 RR Rider's Manual

RDC adhesive label
7
with tyre pressure monitoring
(RDC) OE
86
z
Incorrect tyre fitting can
damage the RDC sensors.
Be sure to explain to the au-
thorised BMW Motorrad dealer
or the specialist workshop that
the wheel is fitted with an RDC
sensor.
If the motorcycle is equipped
with RDC, each wheel rim bears
an adhesive label indicating the
position of the RDC sensor.

Removing front wheel

Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Remove screw 1 and remove
the wheel-speed sensor from
its bore.
Once the calipers have
been removed, there is
a risk of the brake pads being
pressed together to the extent
that they cannot be slipped back
over the brake disc on reas-
sembly.
Do not operate the handbrake
lever when the brake calipers
have been removed.
Remove screws 1 of the brake
calipers on left and right.